Practical tips on how to arrange the beds, very much. But here it is necessary to take into account the specificity of the location. If we make the beds in the greenhouse, the process will be largely different from their arrangement in greenhouses. There are also features of their organization on the open areas of the garden. Therefore, we must turn to the lessons learned and to consider the practical and affordable options for the construction of greenhouse beds.
Please put the Huskies and subscribe to the channel "About Fazenda". This will enable us to publish more interesting garden articles.
General rules
To useful area greenhouses used as much as possible, during the construction of the beds need to take into account some points:
- the size of the greenhouse;
- what crops to be grown;
- Choose material for arrangement of beds and their number.
It is equally important to take into account the orientation and the most greenhouse on both sides of the horizon. Ideally, it should be located from east to west. Then during the day the sunlight will illuminate the plants are almost identical. If we place a greenhouse so it's impossible, at its north wall it is recommended to plant tall plants, so they do not obscure the culture are stunted.
fencing options
There are many different materials that can be used for decorating the greenhouse beds. Among the variety of materials experienced gardeners prefer to several types of protections, has proved to be reliable, convenient and very reasonable cost. In addition, the material must be such that it could work with almost any person engaged in the cultivation of plants in greenhouses, without the use of special masters.
galvanized profile
Those who choose as a material for fences profiled galvanized sheet or trim, prefer to buy ready-made designs, and do it all yourself. It is economical and does not have to customize the details of the size: just know all the parameters of future greenhouse beds. Outwardly, it turns out very aesthetically pleasing, and there is a practical side - durable and comfortable.
basic safety precautions should be taken: to walk with a file in the corners of the profile, so that later in the process not to tear them clothes and do not injure the hands or feet.
Reinforced concrete structures
Choose the design of reinforced concrete, it is impossible to miscalculate - securely, efficiently, thoroughly. Typically, the owners of the greenhouses are not limited to one location for planting, and poured concrete floor, make the steps for watering cans stand. This greenhouse is immediately acquires a well-groomed appearance.
But with all the advantages there are points that need to be provided. First of all - to think through the drainage system. Yet care must be taken to round after casting sharp corners design. So you can safely rely on the bumpers feet.
Fences made of wood
Perhaps the most budget will fence planks. And if impregnate wood preservative, about 10 years old, you can not change anything. Thus, the wood structure are also durable.
But here it is necessary to protect the corners and pegs, which holds the board, nail from the soil. Then the person will not touch them while working in a greenhouse.
Fences, curbs
It looks very aesthetically pleasing fence kerbstones. But apart from that, it is durable and reliable. At its base stone arrangement must be "planted" in concrete mortar. The result is a beautiful and practical framework, smooth paths between the beds.
This is probably one of the most difficult choices fence greenhouse beds, and at a cost not everyone can afford it myself. But to work in a greenhouse - a pleasure.
Fences, flat slate
The most fragile, and therefore, we can say time is of slate fencing. For convenience, the wave is not taken, and the flat material. Of the benefits can be called ease of installation and low cost. But here is to go around the edges of such beds can not be due to its fragility. And drop something not to be - the slate crumbles.
But such a barrier can be made very quickly: by the end of the day it will be ready, and the tool will only need nail file, metal, to cut the slate, and a sledgehammer for driving fasteners.
original articleand many other materials can be found on ourwebsite.
Please put the Huskies and subscribe to the channel "About Fazenda". This will enable us to publish more interesting garden articles.
Read more:Hydrogen peroxide - a real find for flowers in winter. How to apply and what results to expect