Convertible kitchen table for a small kitchen (36 photos), assembling a dining table with your own hands: instructions, photo and video tutorials, price

The overwhelming majority of city apartments belong to the old housing stock. Such premises were built based on the standards adopted at that time, developed in the spirit of the necessary minimalism. Convertible kitchen tables for a small kitchen are the only way to create more or less comfortable conditions. The furniture market has a wide variety of designs.

It is difficult to harmoniously fit typical objects into the cramped conditions of a small room. The best solution would be to make a custom table in the chosen style in a specialized workshop. Such pieces of furniture, of course, are individual, but their cost is much higher than serial ones. This circumstance stops the majority of owners of small-sized housing who do not have high incomes.

Dining table-transformer

The way out of this situation is simple: you need to make a table with variable geometry on your own. A good help in this matter will be the guide below, supplied with photos and video descriptions of this technological process. As practice shows, you can cope with this matter, having a certain set of tools and the necessary materials (find out also,

Preparation for making a transforming table

It is not recommended for a novice master to tackle complex structures, the implementation of which will require a special tool and appropriate experience. The best solution would be an undeniably simple, but time-tested scheme. This is a product with a split tabletop that folds down on furniture hinges. In the working position, it is fixed with a retractable stopper.

To manufacture such a transforming table, we need tools according to the list below:

1. electric drill with adjustable speed;
2. jigsaw with a set of files for working with chipboard and fiberboard;
3. screwdrivers in a set with a Phillips tip;
4. sandpaper.

The main material for modern furniture is laminated chipboard. It can be used both for the manufacture of the supporting frame and table top. Ready-made steel legs with fasteners at the top also look good as a support.

In addition, to make a table with your own hands, you will need:

• PVC tape for processing table top ends;
• natural wood bars;
• piano loop;
• fasteners.

Materials for making a transforming table

Kitchen table manufacturing technology at home

You should start by creating general arrangement drawings and individual parts. The height of our product must be between 650 and 750 mm. The size of the countertop is determined based on the area allocated for this piece of furniture in the kitchen. The reclining part of the table top should not exceed half of the main one, otherwise the table may overturn.

If a larger increase in area is required, then additional covers are installed on opposite sides.

Countertop manufacturing

Actions are performed in a strict sequence, which is prescribed by the instruction:

1. The material is cut with an electric jigsaw. The chipboard sheet is placed on a support so that there is free space under the cutting place.
2. Marking on the plate is applied with an ordinary simple pencil along a long ruler, rounding is done using a compass or a pre-made template.
3. It is advisable to round the corners of the tabletop, this will create additional convenience when using the table. If the linear dimensions of the main part exceed 900-1000 mm, as well as when using ready-made steel legs, a substrate is installed under it.
4. Slab trimming is carried out in two stages, first of all, the cut is polished. Then a special polyvinyl chloride tape is glued. It is recommended to use a tape with a thickness of at least 2 mm.

Helpful advice: when making a cut, the jigsaw should be guided along a rigidly fixed ruler without excessive force, then the cut will be even.

Countertop manufacturing

The parts of the countertop are ready, now they need to be assembled into a single whole. To do this, we lay them on a flat surface with the front plane down. At the place of the movable joint, we fasten the piano loop to both parts. This unit will provide the ability to lower the unused part of the table, freeing up space in a small kitchen for ease of movement.

Manufacturing of frame parts

If the table is made only of chipboard, then it is necessary to make a rigid support. This structure consists of at least two parts, interconnected by a stiffener in the middle. In the upper part, the table top is laid on it. When developing a project and carrying out calculations, not only aesthetic preferences should be taken into account, but also the convenience of placing people at the table and the total price of the product.

The support structure must not interfere with the legs. As a rule, when making frame parts, you have to make many curly cuts. During their production, you need to be especially careful and accurate, therefore it is recommended to use patterns made of thick cardboard. These tools will help keep the jigsaw moving correctly.

Assembling the table on your own

Assembling the product

It is logical to start this operation from the bottom with the installation of the support frame. When connecting fixed parts at right angles to each other, special furniture screws 7 * 70 mm called confirmations are used. These fasteners ensure the maximum reliability of the joint (read also about how to update a kitchen set with your own hands without special financial costs).

Now we install the stop strips, which should move freely in the slots of the parts of the supporting structure. Finally, we install and fix the countertop, using special furniture corners. For strength, the connection is reinforced with furniture spikes.

Dining table-transformer

Conclusion

A transforming dining table for a small kitchen is the best solution. There are two ways to implement it: buy a typical product in a furniture store or make it yourself. The product of your own author's project will fit into your kitchen in the best way and will become a source of pride (see also kitchen furniture drawings and find out how you can assemble a table with your own hands).

Gallery