Assembling kitchen furniture: video instructions for assembling a prefabricated headset with your own hands, at home, price, photo

Almost any man who knows how to hold a screwdriver or screwdriver in his hands can assemble a kitchen set without assistance. It only seems at first glance that the assembly of kitchen furniture is a complex and time-consuming process. Everything is quite simple, because all elements are precisely matched to each other. All that remains is to properly assemble and fasten them, and all this can be done by hand.

Prefabricated kitchen furniture - DIY installation

Installation of a kitchen set

So, the installation of kitchen furniture must be started completely with operations that are suspended for this business.

Namely:

• Measure all dimensions of the place where the headset will be installed. To do this, you need a tape measure. Why is this necessary? To remove one single question - will fit or not.
• Assess the horizontalness of the genital surface. This can be done with a building level. Try to determine if there is a drop. You need to check in two directions (along and across the room).
  instagram viewer
• Check the verticality of the walls. A plumb line is usually used here.
• In the event that a corner kitchen is being installed, then you need to check whether you have a straight corner in your kitchen. This can be done with a tape measure, applying the knowledge of the Pythagorean theorem.

Remember!
The less deviations from the straight-line indicators of the elements of the room, the less difficulties you will have to overcome.
Otherwise, the process of assembling kitchen furniture will drag on for more than one day.

Check the package contents

Now visualize what your kitchen will look like after the headset is installed. Then you need to check the package contents. To be honest, the delivery may be missing some fasteners or be defective. So that in the future all this does not complicate your work, check all the details according to the specification attached to the furniture.

After that, you can start the process itself. kitchen furniture installation. By the way, instructions for assembling kitchen furniture may not always be attached. Do not be sorry about this, because the assembly will be made from ready-made panels and even blocks. But there are some points to which you need to pay special attention.

For example, the back wall.

Its attachment can be done in different ways.

• It can be installed in the tongue of the side walls;
• In the tongue of the lower and upper flange.

Fastening is usually done either with nails, or with metal staples using a stapler, or self-tapping screws. But the most important point is the observance of the geometric shape, which is controlled by the diagonal size..

What to look for

Prefabricated kitchen furniture is more than just a set of cabinets and cabinets. Each such element has built-in structures that are responsible for the comfort and functionality of the furniture. This includes a dish drainer, various containers, mesh boxes, roll-out boxes, and more. Sometimes it is more convenient to install them even before assembling the furniture, so as not to suffer inside the finished cabinets.

Preparation

Hanging system of upper cabinets - what is it? These are usually plane adjustable hooks that will cling to a wall-mounted rail made of metal. So these hooks are also attached even before the assembly of the frame.

There are two mounting methods, it all depends on the manufacturer:

1. Special sleeves are used, which are driven into the prepared additives with a rubber hammer.
2. Fastening is done with self-tapping screws.

The next preparatory stage is the installation of adjustable supports (metal, plastic). Usually, through holes for the bolt have already been drilled under them in the lower shelf of the cabinet. If none are found, you will have to drill yourself (it is not difficult, the main thing is to choose the exact place - 60-90 millimeters from the front side) Then the supports are installed on a bolt and additionally fastened with four self-tapping screws.

Furniture installation

Now you can install the prepared lower parts of the pedestals, on which the supports were mounted.

Panel connection

Attention!
The installation is best done from the highest point that has been determined when evaluating the evenness of the floor.
As practice shows, this is one of the corners of the room. If the difference is small, then it is better to start the installation with a sink or corner cabinet.

Therefore, screw the back and side walls to it. Once the wash cabinet is in place, immediately set it up using the adjustable feet. To do this, use a building level. In the event that the communication holes are not made, you will have to cut them yourself.

After that, you can install a second pedestal, while adjusting the height to the already installed one. Further, both elements are pulled together with clamps and connected to each other with special furniture ties. In the event that it was decided to install a corner or "P" -shaped set in the kitchen, then first of all install and expose corner bases (pedestals).

Installation of wall cabinets

After the floor parts of the furniture are installed, it is necessary to check the horizontalness of the entire structure again. If deviations are found, then it will have to be finalized using adjustable supports.

This must be done at this stage, because:

• The weight of the entire structure is not yet large;
• This may affect evenness. kitchen facades.

The tabletops can now be installed. Please note that the edge of this element should not protrude beyond the edges of the pedestals by more than 40 millimeters. If each cabinet has its own unique kitchen countertop, then they will have to be adjusted together.

There are two options here:

1. The so-called euro joint is a groove that is ready-made in size (the price of such a tabletop is not cheap).
2. You will have to align the joints by hand using sandpaper.

The table top is fastened to the side walls with special metal ties. But first it is recommended to treat the side ends of the countertops with a sealant. Kitchen prefabricated furniture is used in a wet room, so the use of this material is a simple necessity.

When tightening the ties, check the level of the table top so that it is horizontal. Very often in kitchens, countertops are fastened with aluminum corners. This method is easier.

Almost the same applies to the assembly of wall cabinets. The procedure is easier though. Therefore, these elements consist mainly of panels that are interconnected with ties or self-tapping screws.

Installation of adjustable feet

And the last stage is the installation of facades (doors). To do this, even at the stage of preparation (this was mentioned above), it is necessary to install hinges to which the doors themselves are mounted. If the entire structure is set exactly in the horizontal plane, then no problems with skewing should arise.

Conclusion on the topic

As you can see, assembling kitchen furniture yourself at home is not a problem. For those who do not quite understand the information, we suggest watching the video posted on this page, as well as the photo.