Inexpensive kitchen sets (51 photos), do-it-yourself assembly: instructions, photo and video tutorials, price

  • Dec 20, 2020
click fraud protection

Content

  • 1 Inexpensive kitchen furniture
    • 1.1 The cost of manufacturing
    • 1.2 Material cost
  • 2 Conclusion

Renovation in a room such as a kitchen is one of the most expensive and difficult. It requires the availability of not entirely cheap materials of a certain type, in turn, requiring additional elements, which also have a considerable price.

This is due to the fact that this room is exposed to increased moisture, high temperatures and various kinds of pollution, which causes the need to use specific building materials.

An inexpensive and simple kitchen set that can be easily made with your own hands

An inexpensive and simple kitchen set that can be easily made with your own hands

In this case, furniture deserves special attention. Even the most inexpensive kitchen set must have all the necessary qualities for normal operation in this room.

Inexpensive kitchen furniture

Typically, the price of furniture consists of the sum of the costs of manufacturing work and the cost of materials. Moreover, if there is a need to save money, then it is best to look for ways to do it in these parameters.

instagram viewer

Learn also about the features of the Khrushchev kitchen set.

Typical project of an inexpensive kitchen wall with exact dimensions for a specific room

Typical project of an inexpensive kitchen wall with exact dimensions for a specific room

The cost of manufacturing

  • First of all, it should be noted that quite often the cost of design development and engineering is hammered into the price. You can reduce the cost of this stage by creating your own sketch, which will be the plan for creating the headset.
  • To do this, you can take any photo you like, with the image of the kitchen wall, on the basis of which you need to create your own type of furniture.
  • Next, you need to measure the room in which the headset will be located, and based on the measurements obtained, create a detailed drawing of each section.

Advice! To create a project, you can use special computer programs that will greatly simplify this process and help avoid mistakes.

Cutting the material when you buy it can significantly save time and money

Cutting the material when you buy it can significantly save time and money

  • The next point, which makes up a huge part of the cost of a headset, is its manufacture and assembly.
  • It will be significantly cheaper to contact a special company or store that are engaged not only in the sale of materials, but also in their preliminary processing. There are such enterprises in almost every city, since their main activity is in close cooperation with small furniture shops.
  • There, all sheets of the selected material will be cut in accordance with the provided drawing and, if necessary, veneer will be glued. At the same time, the prices for such services are so minimal that they sometimes seem ridiculous.
  • Next, the assembly process takes place, which, in order to save money, is better done by hand. There is nothing difficult here, since this work is very similar to the collection of a children's designer.

Advice! In the same company that sold the material and processed it, you can purchase the tool necessary for assembly and get additional advice or advice. Recommendation! If you do not want to carry out the assembly yourself, then you can also use the services of workers in the company where the material was purchased. It will be much cheaper than purchasing a ready-made wall.

A detailed plan for the construction of kitchen cabinets with an indication of specific elements and types of their installation

A detailed plan for the construction of kitchen cabinets with an indication of specific elements and types of their installation

  • After the cases of the boxes are assembled, doors are installed on them, which are fixed with special hinges.
  • Then door handles and other fittings are mounted.

Thus, you can significantly save on manufacturing and at the same time get exactly the kind of set that is necessary for a particular kitchen.

Find out also about the best interior options for corner kitchens in small apartments.

Varieties of fittings for the kitchen

Varieties of fittings for the kitchen

Material cost

  • Currently, there are many different panels for the manufacture of kitchen furniture. Almost all of them have the necessary qualities that are needed in this room. That is why the instruction for the selection of material recommends stopping your choice on those that will fit the interior and have a low cost.
  • Special attention should be paid to fittings and fasteners and decor. Sometimes they account for the main cost item, since often these parts have a complex design and multiple functions. Therefore, the simpler these elements are, the lower the final price of the furniture will be.
Various types of materials for the manufacture of kitchen furniture, which are presented in terms of quality and color

Various types of materials for the manufacture of kitchen furniture, which are presented in terms of quality and color

  • Countertops are often considered the basis of a kitchen wall. It can also be attributed to the main expense item, but unlike other materials, it is not worth saving on it. The fact is that it is a working surface and must not only have a good appearance, but also have sufficient strength.
  • However, you should not purchase this element made of natural stone. Its price is very high and can be higher than all furniture.

Advice! It is worth purchasing all the material in one store. So you can get a good discount and at the same time buy the main elements made in the same batch, which means they have the same shade.

Inexpensive kitchen furniture made from quality materials

Inexpensive kitchen furniture made from quality materials

Conclusion

Based on what the video instruction shows, we can conclude that inexpensive furniture can look very respectable and of high quality. It's just that simpler materials and fittings are used for its manufacture.

You can also make a kitchen wall yourself, which will significantly reduce its cost and at the same time make it possible to show individuality in personal creativity. That is why many people choose this option for creating an interior.

Read also the article "The height of the kitchen unit - we understand the dimensions."

Gallery


















Did you like the article? Subscribe to our channel Yandex. Zen