Sink for the kitchen with a curbstone: do-it-yourself video instructions for installation, price, photo

Recently, a sink with a cabinet for the kitchen is a frequent attribute of a modern home. Some models of cabinets have not only single and double doors, but also pull-out drawers necessary for cutlery.

These sinks can be considered multifunctional, as they can act as versatile objects. At the same time, it becomes possible to rationally use the space.

Contemporary vanity unit for the kitchen in a classic style.

In the acquisition process

For a long time, a kitchen cabinet with a sink has been considered a basic component that affects the appearance of a cooking room, as well as its functionality.

This element of the interior should not only fit well into the design, but also perform certain functions. Currently on the market you can see the widest range of models. When making a choice, it should be understood that the main emphasis is on performance.

Sink materials

When a sink with a cabinet is purchased for the kitchen, attention is not always paid to the material used to make the sink itself.

Although in fact, it is of particular importance in the selection of a style solution, and also has a direct impact on the options for care during operation.

The location of the cabinet under the kitchen sink in a small room.

• Stainless steel is the most widely used for practical reasons (see. also stainless steel kitchen sink). The structure of the material prevents detergents from sticking to the surface.
  Hygiene and corrosion resistance also play an important role. However, the relatively low price is also an important factor when choosing.
• Composite materials have many benefits. They are heat resistant, durable and scratch resistant. Sinks with stone kitchen cabinets are environmentally friendly and do not need special care. Remove dirt with a simple sponge and soapy water.
• Ceramics are beneficial in terms of appearance. As a rule, products are made of earthenware and porcelain. Similar ceramic sinks for kitchen look great and pleasant to the touch.

Advice!
If color fastness plays an important role, then the choice is best made in favor of composite products. As for dirt and stains, they can be easily washed off with a simple sponge.

Main selection criteria

If a cabinet with a kitchen sink is purchased in one store, then there is a possibility of offering several options. In this case, the risk is reduced that the vending model will not fit the cabinet in terms of installation method or size. However, at the same time, one may encounter high prices and limited assortment.

There are special selection criteria.

• The size depends more on the area of ​​the room itself. In a small room, a 120 centimeters wide sink will look inappropriate.
• Location has a direct impact on acquisition, as models can be angular or in a row.
• The number of bowls sometimes reaches five. If there are more than three of them, then you will need a mixer with a retractable watering can, which in any case will affect finances.
• Style plays an essential role, because each element must be in harmony with the overall concept.

Non-standard cabinet under the sink in the kitchen.

Attention!
A large number of sinks are equipped with additional devices that improve functionality, making the work with dishes and food more pleasant.

Installation work

These days, a vanity unit under the sink is very often included in the set of purchased furniture, but it can also be supplied separately. In the first case, an industrial product does not require any adjustment of the elements.

However, in another situation, when an individual approach is needed, you have to do the installation yourself.

Mortise products

With this option sinks for kitchen located on top of a table top or a free-standing cabinet like a lid. They are kept on the surface thanks to the protruding sides. If the upper part is made of stone or any other difficult-to-work materials, it is advisable to turn to professionals.

Independently it will be possible to cope only with MDF, chipboard or solid wood.

1. Above, the contours of the cutout are outlined using a template that almost always comes with the sink.
   If it is absent, then the product is simply turned upside down, after which a stroke is made with a pencil or marker. However, it is required to retreat from it into the depth of 10-15 cm and draw another line.
2. Next, holes are drilled at the corners of the intended cut with linear contours or along the entire perimeter with an oval and round shape of the product.
   An electric jigsaw is used to cut along a drawn line, which is often shown in the video.
3. The cut part is removed, and the cut is completely cleaned of dust and sawdust. Silicone sealant or any other means is applied in a uniform layer. It will take some time for the composition to dry.
4. After installation, the sink is pressed with clamps or special clamps, if they are included in the set. The excess of dried sealant is carefully removed.

Placement of the vanity unit in the kitchen in an interesting style.

Addition!
The edges of the sink itself are also treated with silicone or covered with a sealing tape that acts as a gasket. In many cases it is included in the kit.

Overhead products

With this option, the kitchen cabinet under the sink is usually devoid of the upper part, the overhead sink replaces the countertop. This method is considered the simplest, since it does not involve complex actions. It is quite possible to carry out the installation without outside help.

There are three main mounting options in total.

1. Glue fixation is the easiest option. The upper part of the product, applied to a special structure, should be larger than the underframe itself, then its edges will completely cover the ribs.
   The ends of the cabinet are treated with silicone before installation. Thus, the lid will adhere well after the adhesive has dried.
2. Attachment with mounting brackets is used if included. First of all, self-tapping screws are screwed in from the inside, and these latches are already cured on them. A special corner is displaced along the screw so that the self-tapping screw gets into the recess of the part.
3. Fixing using wooden blocks is used when the standard option is not suitable.
   That is, in the presence of various defects and the absence of fasteners. In this case, kitchen sinks with a curbstone are installed using a special mounting platform.
   The bars should be placed in a box and four corners screwed to the slats.

Cabinet with a mortise sink in the photo.

Important!
Experts recommend fastening without using an automatic tool, since serious constrictions can lead to cracking of the planes.

General points

Most often, sinks are tied to the water supply and sewerage system, so they are located next to the wall adjacent to the bathroom or in the corner. However, modern technology has made it possible to achieve more flexible results.

There are some rules that apply to all types of products.

1. In any case, this element should not be placed near a stove or refrigerator.
2. As for convenience, it is better to locate the dishwashing area closer to the work surfaces where food is prepared.
3. It is very good if the sink divides the work area into two parts. One of them is for table setting, and the other is for dirty work.

Large dishwashing area on the right side.

Advice!
The mortise option is considered most often when it is necessary to install sectional furniture with a single surface. Then it will be possible to avoid the accumulation of moisture between the cabinets.

Consideration of the corner option

A corner cabinet under the kitchen sink is purchased when the cooking space is small. This solution saves space to a large extent. After installation, a full-fledged washing center is formed, which will look great.

As for the advantages over ordinary counterparts, they are obvious:

• An original and specific design that allows you to achieve high aesthetic results.
• Compactness, which makes it possible to successfully implement the product with convenient operation.
• Maximum functionality.

Note!
Having made a choice in favor of the corner option, it becomes possible to create not only an elegant design, but also quickly perform work related to cooking.

Corner version in excellent performance.

Finally

The above instruction allows you to understand which side tables under the sink in the kitchen are installed today. If necessary, you can carry out the installation work yourself.