What if you do this? Or how to quickly wash away plaque in the bathroom

Plaque on the bathtub is formed from calcium and sodium salts, which are deposited on the base from the fat particles that fall during washing. The harder the water, the more salts. Such deposits cannot be effectively washed with water and soap. But there are ways.

It is important to remember that you need not to damage the surface of the bath, otherwise the plaque will stick much stronger in the future. To do this, it is worth abandoning all sorts of metal devices: wire brushes, metal sponges, sandpaper, etc. It is even worth a parasail, if applied, diluted with water and turned into gruel. You should be especially careful with the acrylic bathtub.

Soda and vinegar

Simple and safe, pour soda on the dirt, pour vinegar after 2-3 minutes. When soda and vinegar interact, a reaction occurs, salt, water and carbon dioxide are formed, but this is not the point. The main thing is that plaque is destroyed and it can be washed off with a sponge or rag. You can enhance the effect if you add soda ash in equal proportions with the usual. But then the solution must be left on the contamination for 30-40 minutes.

vinegar and soda

Lemon acid

Two or three packs of citric acid, dissolve two glasses of water per pack and apply the solution to the dirt. After 20 minutes, wash off, wash with a sponge and apply again. The method is not strong, but gentle for baths with any surfaces.

it looks like citric acid

White

The tool is powerful, it is used only on cast-iron bathrooms and then only in diluted form 1 tablespoon of bleach for 2 tablespoons of vinegar, plus powder and a little water until the consistency of a thick, uniform mass. You can wash off after application after 15-20 minutes.

white

Ammonia

It is diluted with water in equal proportions, a cloth soaked in the solution lies on the dirt for about 30-60 minutes. After that, you can wipe off the plaque and rinse everything off.

one of the options for ammonia

Soda and peroxide

It is necessary to mix in a proportion of ½ 1-soda 2-peroxide. Until a homogeneous thick mass. Then everything is as usual: apply, wait, rinse. Wash off after about an hour.

peroxide and soda

In conclusion, we can mention that a more careful handling of the bathroom will allow you to resort to general cleaning much less often. Therefore, rinse it after washing with warm water, protect it from cracks and scratches. The water filter will also be useful in the bath, softer water will reduce the amount of sediment. And if you really like your bathtub, it will not be superfluous to wash it immediately after use, for example, by applying a glass cleaner or detergent to its surface. With such a reverent attitude, the need for a thorough cleaning may not arise.

what do we get in the end