(!)Subscribe to our channel at Zen >>IDEAS FOR LIFE| NOVATE.RU<
If you need to put a lot of posts in the country, and I want to do it as quickly and efficiently as possible, you can resort to using this technique here. The basis of this method of installation is the "classic" recipe with the digging of wells and the preparation of concrete, only it was slightly modified so resourceful craftsmen to take less time. READ MORE.
To work needed
First of all you will need a cement-sand mixture, which each master is calculated individually depending on the "front of work". On one pole out 1-3 bags of 25 kg. To find such a profile may be in any store. Actually need poles themselves.
progress of work
It begins as usual. First, we make a hole under our post depth of approximately 1 meter. At the bottom of laid stone or brick. Then we put the poles into the pit and align them. To ensure stability, you can use the timber, stones and pieces of brick.
Now we arm level and align all. From this moment begins the "custom" of the method, which consists in the fact that cement (in the preparation of which takes most of the time), not preparing separately and directly into the pit.
First, take a garden hose and abundantly watered wells of emptiness. Open the bag with the mixture and pour evenly. Re-watered. Regret the water is not necessary, because the part will go into the ground. Now pour the second bag and repeat the procedure again if necessary. We are waiting for 12 hours, and do blind area to drain water.
Important: Before working with the mixture, it is necessary to wear a dust mask and safety glasses.
I would like to learn more interesting things? Then you should read about these 8 alarm bells, showing that it's time to throw your mattress and as soon as possible.
(!)Subscribe to our channel at Zen >>IDEAS FOR LIFE| NOVATE.RU<
A source: https://novate.ru/blogs/150918/47784