(!)Subscribe to our channel at Zen >>IDEAS FOR LIFE| NOVATE.RU<
Caulking Nut - this is a very useful thing, especially in situations where there is a need fixing unit or subassembly exposed dynamic loads. Simple connection in such a situation is not suitable, as it will weaken very quickly, and the whole structure will begin to unwind. As a result, all may result in an emergency situation.
Bases prevent unwinding of a threaded joint
First of all, you can just pick up and wind the lock nut, as which can be used as a special clamping nut, and quite plain, designed for this purpose. Effectively use the pressure washer. Finally, the compound can be applied or used samospornuyu nut with polyamide or nylon X's ring.
What is needed to create a self-locking nut
The first thing to itself the nut and bolt that must be stalled. And yet - a heat source, fit even lighter, wrenches and wiring shrink tube. That's all preparation.
Process of creation
We put on our tube on the bolt so as to obtain a small ponytail. After that, take a lighter and heat the tube to make it properly, he clutched the bolt and tightened his "tail", which will be the guide for the nut. Now we put the nut on the tube, lower it and start spinning. At this stage, it has to be connected to the case of the keys, so you go nuts will be very tight. Very soon thread the tail cut off, and it will disappear. Congratulations, samokotryaschayasya nut is ready!
Continuing the theme 10 ways to quickly fix the clothes with the help of available funds and not only.
(!)Subscribe to our channel at Zen >>IDEAS FOR LIFE| NOVATE.RU<
A source: https://novate.ru/blogs/290818/47605/