How to make a snow-white and new one out of an old and dirty bathtub in 6

  • Mar 04, 2021
click fraud protection

It's no secret that over time, any plumbing starts to look worse. If a couple of years ago you were happy with a new, snow-white bath, today its appearance can make you sad. The white coating gradually disappears behind a layer of dirt and plaque. Naturally, the room in which there is an unkempt, well-worn, yellow bathtub cannot be called beautiful.

How to make an old and dirty bathtub white and new in 6 - 7 minutes. Simple and cheap method

You can vacuum and dust in the apartment for as long as you like, but it is the state of the bathroom that will tell guests about your neatness. In order not to “fall into the dirt with your face”, I propose to return the shine and whiteness to the bath in just a few minutes. Don't believe me? But listen!

Why does the bathtub turn yellow over time?

To solve the problem completely and irrevocably, and not just "cover your tracks", I advise you to familiarize yourself with its root cause. You have finished your bath procedures, left the bath clean, refreshed, satisfied, and you don’t think about how your plumber feels after that. The inner surface of the bath is covered with a uniform coating of insoluble substances contained in tap water. It turns out that you are swimming, and the plumbing is getting dirty.

instagram viewer

The problem is especially relevant for regions with hard water. In this case, not only the bathtub loses its original appearance, but also the toilet bowl, taps, washbasin, etc.

Natural processes are also inevitable. Do you understand what this is about? Of course, about corrosion. Today most apartments already have plastic water pipes. However, not all owners bother continuing to use cast iron pipes. Iron corrodes over time, and the pressure of the water removes all rust and deposits from the pipes from the tap. What kind of bath will remain whitened after such abuse?

What I do not advise to do in any case!

All is said to be fine in war, but not in the bathroom. If you try to wash it off with abrasive products, it will only get worse. You will erase acrylic from the surface of the plumbing, after which even minor damage to the bath can lead to dire, irreversible consequences.

Using abrasive products will leave small scratches on the acrylic. Over time, their number will increase until there is no plastic left on the bathtub.

"It does not threaten me, I have enamel!" - many might think. But even enameled baths are not advisable to clean with abrasives. No matter how durable the coating is, with improper care it loses its properties.

When cleaning, do not forget about the safety of your own hands - wear gloves. Remember that most store products contain acids and other corrosive ingredients.

This was all a preface, but now let's move on to a simple method that can return your bathtub to whiteness in just a few minutes. I note that the method is based on a chemical reaction, and therefore it is better to play it safe and use personal protective equipment: gloves and a mask.

So, a wonderful method for housewives ...

So we got to the main point. Follow the instructions and you will be happy:

1. Arm yourself with baking soda (I think everyone has it on the farm). You need to pour 2 tablespoons of baking soda with water and stir to make a gruel.

2. Apply the resulting product to a soft sponge and walk it over the dirtiest parts of the bath, or treat the entire surface. To increase the effect, you can moisten the bath beforehand. The baking soda should sit for about 5 to 6 minutes.

3. While there is time, pour water into a small container, dissolve citric acid in it. With the prepared liquid and you need to wash off the soda gruel from the bath.

That's all! I hope you succeeded and you are absolutely delighted with the result! Share your impressions in the comments.

Thank you very much for reading the article to the end! I will be very happy about your like 👍 andsubscribing to the channel.