There is nothing pleasant about the appearance of a dent on the car body. However, when this happens to your car, there is no need to worry ahead of time. The vast majority of dents, including quite large ones, can be relatively easily and quickly removed with the help of improvised means, returning the body metal to its original appearance. Let's consider three of the most popular and effective ways.
1. Correct the dent with scotch tape
This method is the simplest and at the same time available for most motorists. It should be understood that it is mainly suitable only for smooth and shallow dents. All you need to do is stick a strip of tape along the entire length of the dent so that it is right in the fairway of the unpleasant defect. Several more pieces of adhesive tape are glued to this strip (not on top of each other, but one to one) across so that a cross is obtained.
When everything is done, the work remains small - we pull the end of the longitudinal strip so that the transverse ones are pulled. With proper effort and proper gluing, the dent will be straightened in one motion.
2. Fixing the dent with glue sticks
In virtually the same way, dents are removed using glue sticks. You can find these in the departments of household goods. The principle of the operations carried out is the same. You need to glue a few rods to the center of the dent, and then pull them sharply. Of course, the larger the defect area, the thicker the beam should be.
READ ALSO: Why were glass balls made in the USSR, which children in the yard wanted to get
Also, it is imperative to pour hot water on the body (preferably boiling water) immediately after the rods have been glued to it. This will make the metal more pliable and make straightening easier. One good move and the problem is gone. It remains only to clean the paintwork from the traces of adhesion.
>>>>Ideas for life | NOVATE.RU<<<<
3. Correct the dent with a plunger
Finally, you don't have to glue anything to the dent on the car body, but just use a plumbing tool like a plunger. First, the damaged area of the body is thoroughly poured with boiling water. A plunger is immediately sucked to the heated metal, after which it is enough just to pull the tool towards you so that it comes off. The usual 1-2 movements are enough for virtually complete straightening of the dent. In the same way, only with the help of a special suction cup, most of the dents are removed by the master in the salons.
If you want to know even more interesting things, then you should read about why are special covers installed on the headlightsdeteriorating lighting.
A source: https://novate.ru/blogs/250920/56152/