(!)Subscribe to our channel at Zen >>IDEAS FOR LIFE| NOVATE.RU<
One little secret will allow the glue plastic bags and items are usually second adhesive so reliable that it is difficult to imagine, if not seen with my own eyes the effectiveness of this method. This secret enhances bond strength by almost 10 times. This would require one additional ingredient.
What is the essence?
The secret, in fact, lies in the fact that you have to use a certain amount of soda that will be applied around the seam glued with superglue plastic parts. It should immediately be noted that as a result of such machinations around the seam seal is displayed. Salt that glue cyanoacrylates actively interact with soda. When mixing the two components, a reaction occurs creating a solid composition. That will have some sort of cold welding.
Like all the crank?
First of all, it needs a second adhesive and soda. Lubricates both plastic parts glue and connect. When contacting the excess glue pressed out of the slit. His richly sprinkle baking soda. Now we wait for 5-10 seconds and deflates soda. The resulting influx once we coat with glue and sprinkle baking soda. Deflates in 5-10 seconds. Now we have ready almost unbreakable linkage that will securely hold the plastic parts. We can only let it stand for a repaired product 20-24 hours to "dry."
On the pros and cons
The advantages of this method include bonding instantly hardening and a very strong coupling. The applicability of the method to any kind of plastic. Possibility to seal, thus, even the holes and openings.
Have a method, however, a downside. Instant curing composition does not allow him to pour into any product. The composition may be applied only to the surface. When the reaction heat is released.
Continuing the theme yet 8 vkusnyashek most vile, that taste is not everyone's strength and not only.
(!)Subscribe to our channel at Zen >>IDEAS FOR LIFE| NOVATE.RU<
A source: https://novate.ru/blogs/130718/47072/