Modern window systems have become a true salvation for those who value home coziness and comfort. Thanks to their design and the materials used, they perfectly insulate the room, protecting it from heat, cold, dust and noise. But in order for the windows to perform their functions normally, they need to be looked after accordingly.
Proper care
Of course, aluminum and plastic structures have their own resource, it is gradually being developed, sooner or later it will be necessary to produce Schuko window repair and any other manufacturer. This unpleasant moment can be pushed far ahead, and the repair itself can be made not so difficult if you adhere to very simple rules of operation and maintenance.
Although high-tech materials are used for the production of windows, the structures made of them do not last forever and require some maintenance. Without it, sooner or later the windows lose their qualities, their sashes sag, the fittings begin to work poorly, they constantly jam, the windows do not close well and lose their tightness. These and other troubles deprive the owner of all the advantages of using modern window systems.
Preventive measures
The first thing to take care of is the profile itself. Although, he is more likely to be damaged by wrong actions than their absence. The top layer of the profile is a protective coating that protects against the effects of the external environment. Aggressive detergents with acids or alkalis will quickly destroy it, causing dirt to build up, fungus and further damage.
The second important point is the care of the fittings. Hardware is one of the most vulnerable points in the entire structure, regardless of the material of manufacture of the windows. The load is constantly acting on it, and given the method of attachment, this leads to big problems. All fittings are fixed on screw connections, which weaken over time, which in turn leads to distortions. On the one hand, the windows stop closing normally and gaps appear. On the other hand, the resulting stresses in the profile can cause cracks and depressurization at the point of contact of the glass unit. Repair of plastic windows, in particular, the adjustment of the fittings is carried out by the master. By tightening the screws, it restores the position of the flaps and gets rid of distortions. The timely lubrication of the fittings with mineral oils depends directly on the owner. This simple step will save you from hassles such as jammed handles and hard-to-open packages.
The seal is the third thing the owner should pay attention to. The sealant provides the entire structure with tightness, preventing water, drafts and foreign odors from penetrating inside. It is made from soft yet durable rubber. Unfortunately, over time, it dries out and loses its elasticity, the sashes no longer fit normally to the frame. To care for the seal, glycerin or silicone oils are used, they do not allow the rubber to dry out and keep it in good condition.
Periodic maintenance of window systems can be done by the owner, it takes very little time. It is performed once a season, and in particularly difficult conditions - once every couple of months.
Serious window repair performed by specialists. Condensation that appears in the glass unit, skewed sashes and similar problems are a serious reason for calling a qualified technician.