It is quite difficult to work with a gasoline brushcutter. It is necessary to take into account many details and nuances, from starting the engine to filling the spit with an oil-gasoline mixture.
As a rule, brushcutters are purchased by people who have never dealt with similar devices before. The first question that arises during the operation of such a streamer is the following: "Is it possible to" gas "while mowing or is it better to release the gas?"
When mowing grass with a brushcutter, the movements should be slow and smooth, directed from side to side. Keep the trimmer at the same distance from the ground. In this case, the mower should perform the so-called "duck step", i.e. move half of its normal stride.
These were the basic tips for beginners, and now we are smoothly getting to the topic of today's article.
Some users, especially those who have recently acquired a brushcutter, cannot maintain normal speed during the entire mowing. During the mowing process, it is advisable to change the engine speed depending on the density of the grass.
If the vegetation is soft, young and thin, there is no need to turn on the trimmer at high power, a low engine speed will be enough.
When working with a brushcutter, you need to be extremely careful, follow the work, feel the tool in your hands. If the trimmer fails to tackle the grass, you can add power.
Experienced users assure that continuous operation at high speeds is harmful to the tool. If the gas is not released periodically, the fuel consumption will increase several times. Also, when working at high power, trimmer parts will wear out faster.
Experts advise to release the gas when the streamer moves back. Thus, the engine will cool slightly, and the parts will be lubricated (due to the fact that the throttle valve closes).
If you constantly "gas", the trimmer will have to be refueled more often, because fuel consumption increases significantly. It is also possible that the engine will soon overheat and fail. And its repair or replacement is a rather expensive pleasure.
It must be said that if you periodically release gas when mowing with a brushcutter, the vegetation will be mowed evenly and accurately, folding into small swaths. Why does this happen? The trimmer, moving in one direction, mows the grass, and moving in the other direction, forms a neat swath.
What conclusion can be drawn from all of the above:
- when working with a brushcutter, you need to periodically release the gas;
- if this is not done, fuel consumption increases;
- when working at high powers, parts and accessories of the trimmer wear out faster;
- if the gas is not released, the engine will quickly fail.
So it turns out as in the old saying: "The quieter you go - the further you will be!"
Thank you for reading this article to the end! I will be infinitely happy about your like 👍 andsubscribing to the channel.