Holes in the rapids are a nightmare for any motorist. And yet, even with the most careful caring for the vehicle body, trouble sooner or later comes to the garage. Once in such a situation, it is best to seek help from qualified professionals. However, anything can happen in life, and at some time there may simply not be extra funds for non-free "help". There is a way out of this situation: do it yourself budget repairs.
What you need: fiberglass, anti-gravel, primer, varnish, paint, finishing putty, starting putty with fiberglass, Novol PLUS 720 polyester resin
The first step is to treat the corroded section of the threshold. To do this, we use a grinder with a petal circle and abrasive products. Then a hammer is taken into the hands, with its help the method of striking the worn-out metal increases the rigidity of the cleaned surface.
The fiberglass is cut into small strips to fit the size of the stripped hole with a margin. The metal freed from rust must be thoroughly lubricated with resin, after which the first piece of fiberglass is glued on top, which is impregnated with polyester. As soon as the materials "grab", another flap is applied and the whole procedure is repeated.
>>>>Ideas for life | NOVATE.RU<<<<
Having made a fiberglass casing, we polish it. The same grinder with a petal disc will help us in this matter. After removing all the differences, we apply a putty to the surface, wait for it to dry and process the place of repair with sandpaper, after which we apply the finishing putty. We take up the grinding again. Having achieved a flat surface, we apply anti-gravel to it.
After that, all that remains is to paint and apply varnish.
Continuing the topic, read about 4 signs by which it is easy to identify in a couple of minutes a car with a worn out engine.
Source: https://novate.ru/blogs/021120/56611/
IT IS INTERESTING:
1. A useful trick that will allow you to no longer suffer from windshield wiper stripes
2. "Zhiguli" for the KGB: how the fastest VAZ cars were created in the USSR
3. Why do tanks have caterpillar fingers with a hat inward, and tractors - outward? (video)