How to quickly reset an error from the instrument panel without using a scanner

  • Nov 10, 2021
click fraud protection
How to quickly reset an error from the instrument panel without using a scanner

The dashboard in modern cars has many bulbs that signal probable problems. But even when the malfunction is eliminated, the light bulb sometimes continues to shine. This naturally irritates the driver. Errors from memory can be removed, then everything will return to its place. There is a very simple and quick way.

If you find an error on the dashboard of your car, you can try to fix it yourself.
If you find an error on the dashboard of your car, you can try to fix it yourself.
If you find an error on the dashboard of your car, you can try to fix it yourself.

To reset fault codes, special diagnostic equipment is usually used. Of course, not all vehicle owners have such devices. It takes a long time to contact the service and you will have to pay. Resetting the terminals does not help in all cases. Sometimes it will take time, and the effect may not be.

We insert the key into the ignition switch and turn it without starting the engine
We insert the key into the ignition switch and turn it without starting the engine

But the task can be solved in a matter of minutes by yourself. To do this, you need to turn off all electrical appliances in the car (we are talking about headlights, stove, and so on). Then you need to turn the key in the ignition lock without starting the engine and leave it in this position for twenty seconds.

instagram viewer

After repeating the procedure with the key, start the engine, the error may still glow
After repeating the procedure with the key, start the engine, the error may still glow

Then the procedure should be repeated - return the key to its original position and turn it again (wait another twenty seconds). After that, the key must be removed, and then inserted and started the motor.

>>>>Ideas for life | NOVATE.RU<<<<

After a couple of minutes, the light will go out, if only this is just an error, and not a serious malfunction.
After a couple of minutes, the light will go out, if only this is just an error, and not a serious malfunction.

After a couple of seconds, the light will stop glowing. The method has been working on machines since the early 2000s. The algorithm works only in case of an error, and not a malfunction. If the car has a problem, it must be fixed.

Continuing the topic, read about 5 high-quality Japanese cars that cannot be killed in the Russian open spaces.
A source: https://novate.ru/blogs/080621/59309/

IT IS INTERESTING:

1. A country where there are no unemployed and poor, and gasoline is cheaper than water

2. Why do American men wear a T-shirt under their shirt?

3. How many liters of gasoline remain in the tank when the light comes on (video)