Furniture for bath from wood

  • Dec 24, 2019
click fraud protection

If you are planning to build their own bath, you will have to acquire appropriate pieces of furniture. It is desirable that they were made of wood. Prices for finished products are not always available. However, do not worry you can build benches, benches and tables with their own hands. Interested? Then refer to the drawings and assembly diagrams, which will be laid out in this publication.

Furniture for bath from wood
Furniture for bath from wood

This and many other materials can be found on our website.

Please put the Huskies and subscribe to the channel "About Fazenda". This will enable us to publish more interesting garden articles.

Bath furniture with his own hands and simply available

Creating a bath with his hands complicated process which involves certain troubles. Above this room will have to work hard, because this is where you will relax and restore peace of mind to gain strength. That is why you need to choose furniture according to certain criteria.

Best furniture steam is the one that is made of wood (linden, aspen). Such a timber is resistant to high temperature, high humidity. It is characterized by low thermal conductivity, so it will be operated for many years without changing its original appearance.
instagram viewer
Best furniture steam is the one that is made of wood
Best furniture steam is the one that is made of wood

If there is a financial opportunity in the steam room, you can install the finished furniture. However, compared with homemade furniture, it is not able to create a cozy and warm in the sauna room. With the initial building skills, you can build a table, shelves, benches without any problems. The main stock the necessary materials and tools, and happy to get started.

Homemade furniture heart steam bath

In the equipped properly the steam room should not be unnecessary items. Permissible only availability for lying, additional elements in the form of support under the head, basin, scoop.

In the equipped properly the steam room should not be unnecessary items
In the equipped properly the steam room should not be unnecessary items

To overdo it with the number of items in the steam room should not be, because they will prevent air circulation. Before you take for the production of sun beds for bathhouses, determine the size of shelves and its form (in the form of steps or along the perimeter of the room). Think about its purpose: for sitting or lying. Rely on their preferences and take into account the characteristics of the premises.

At the initial stage of construction Poloka you need to make the measurement space and loungers sketch. Measure steam draw its schematic drawing, be defined with the location of the boiler and doors. Next, specify the paper where you want the next shelf. Specify the parameters and the mounting location.

Important! Attach the top shelf to the wall, the one that is at the bottom - to the floor. Same way it will be easier to carry out cleaning of the room. Once you remove measurements, gain boards and beams, down to business.

From a bar (100 x 50 section) Construct frame. To connect the racks can be used metal screws. The distance between such parts shall be a maximum of 45-50 cm.

Then proceed to the manufacture of seats for the shelves. As a material well suited sanded boards or linings. Attach the board, keeping a distance of 1-1.5 cm therebetween. So water can quickly run down, which will accelerate the drying of the seats.

To fix the boards preferably used nageli of wood. If you take for fastening metal parts, they will be heated, which is fraught with burns.

Tip!There is no need to carry out the processing of wood products, which are located in the steam room. Under the influence of high temperature coatings, paints and chemical impregnation into the air poisonous fumes that can cause poisoning while in the bath.

Tables and benches for the home bathhouse

Benches and a table is always set in the dressing room. At this point, you can enjoy a cup of tea, sit back and relax. Manufacture of ordinary shops carried out in the same manner as the shelves.

Benches and a table is always set in the dressing room
Benches and a table is always set in the dressing room

Attach them to the wall is not necessary. To work needed:

  • bars (cross-section 100 x 50);
  • boards or linings;
  • screws or other fasteners.

Before you begin to build benches, grind every detail in order to prevent injuries and splinters. First, spend a sanding operation with a grinder, and then manually. For the latter method, use sandpaper. Special attention to the edges and corners of the parts.

  • Focusing on the drawing, measure the necessary length and cut timber.
  • Construct frame parts of the circumcision.
  • Attach it boards or battens. The distance between them should amount to at least 1 cm.

Now it's time to build a table, which must necessarily enter into a furniture set for a bath.

To work, prepare:

  • glulam for sidewalls and rungs;
  • furniture board for cutting countertop;
  • fasteners.

Take timber, saw out of him every detail. Make cuts, will begin assembling the structure. At the joint space parts, apply carpenter's glue this table will improve the strength and prolong its service life.

Furniture small things

It is difficult to imagine a room without a bath useful accessories. It is about the shelves, supports, headrests, hangers. It is not necessary to buy these little things in the store, you can work hard and make their own hands.

Benches and a table is always set in the dressing room
Benches and a table is always set in the dressing room

To create a hanger use the remnants of lumber. manufacturing scheme is as follows:

  • Take the jigsaw, cut the board to the required length and give them the desired shape.
  • Fix the parts using screws for furniture.
  • Apply a stain on the board when it is dry coat varnish.
  • Take the screws and attach the hooks to the structure. That's all, you get the original hanger.

Headrest Massager is also done without too much difficulty. If you want to build it with his own hands, prepare:

  • Wooden panel for bokovushek;
  • coli circular shape (diameter 3 cm);
  • wood screws or dowels of wood.

Draw a sketch on wooden panels of the sidewalls. Saw parts of equal size. This form of sidewalls give the anatomical shape of the headrest. cut into 10-15 pieces (length 35 cm) made of wooden sticks. For bonding the sidewalls and sticks take screws or dowels. Between step chopsticks leave at least 0.5 cm. This will promote good ventilation.

Important!Before you seal the details of which will be made the head restraint, carefully grind them.

Banka - one of the best places to relax after work, people, improve your health, restore mental strength and just have fun with family or friends. If you have planned to create for her furniture and accessories, we hope that our publication has been useful to you.

This and many other materials can be found on our website.

Please put the Huskies and subscribe to the channel "About Fazenda". This will enable us to publish more interesting garden articles.

Read more: Pancakes with kefir lush