Friends, I welcome you!
Ahead of frost! I do not want to flush the radiator with no network or system with underfloor heating, which means you need to start heating... Therefore, the installation of the front door and I did not put off.
My house was built from blocks of ceramic-lined zabutovochnogo corpulent bricks. Area south, so the total thickness of the wall is not large - 45 cm. (12.5 cm bricks. + Seam 12 cm. + Block of 28 cm. 2-3 cm + plaster.)
When the installers come and have a look at the installation site - a little depressed... and indeed, during the installation of the door frame, they had to be patient.
What can I say and what had to face:
Boring facing brick did not, because there is a probability of cleavage, and therefore the installation doorframe performed on reinforced plate to the main wall materials, i.e. the ceramic unit.
Exposed plate so that the main anchor sign into the seam between the blocks. Then they set the box and fixed on a level plate.
In the process of tightening some anchors, there was a problem, that they are not fixed in the joint cavity and have a play. Rather, when laying, - voids are formed and the solution was partially flew in the cell material, although the net sandwiched.
Since established anchors - were not working as they should, - respectively, and the plate, and place them in a box and - hold "on snot." Out of the situation by means of screws on the concrete.
Drilled holes of each plate and screws are driven in different planes that are not perpendicular position of the unit. As a result, each plate 3 is fixed to the fastening element.
Further, the door inner side propenyl component foam and set (taped) along the perimeter vapor barrier tape.
And yes, with the windows had the same song, 2-3 screws driven into the ditch!
Installation took about 4 hours and a lot of nerves)))
Tips from the passed experiences:
If, however, you are building a house made of ceramic blocks, pay attention to sections of door and window openings. Let the builders do mortgages or in extreme cases - brick inserts.
If the above is still missing - use chemical anchor.
Thanks for attention! I hope that what you will help!
________
If you liked the article, place and Likesubscribe to my channel!
1.If the diagonals are equal, it does not mean that you have a steady home. Why? I tell the story!
2.Why is the main size of metal products is in the length of 11.7 m.?
3.Variants of construction of right angles in the construction of the house and check the angles at the already erected.
4.The process of laying his own house from A to Z.
5. The first experience of a plasterer! Plastering under tiles on plaster beacons in their own hands.