Each hostess in its arsenal has a kitchen cover. They need necessarily to Jota just for cooking food. And they have everyone, I am absolutely sure.
Previously, caps were made of the same material as that of the pan. If the pan is aluminum, and the cover is aluminum, if the enamel, the enamel and the cover respectively, and so on.
If you look now, the high demand modern stainless steel cookware and modern pans with non-stick coating.
And to him the bundle, and not to the frying pans are usually cover glass, with metal edging around the edges.
In principle, the convenience, there is a definite. These covers come in size, so that by the pot or pan to pick them will have no difficulty. The cost covers ranges from cheap to expensive.
My wife and I choose the middle option, and covers have these seven pieces in the house, all of different sizes.
They are certainly convenient, but have one drawback, like getting dirty. They accumulates fat, with sometimes in very remote places, and to wash it out, still need to manage.
Then just right to recall and enameled aluminum cover, with their hook or problems were not any. They are hiding places where the fat is hidden, it is not there. I took a sponge with Feri, washed in a hurry, and they are like new. But with glass, so even those who have provided at the edges of the metal edging, it is necessary to torment! Because the fat is deposited in just a crack, which structurally is provided between the metal edging and glass. Although the fork to pick out his or needle. Frankly, I personally tried it, but the best results could not reach.
And then his wife wondered how this problem solve, how qualitatively launder cover that they shone and dirt on them no left, even in this unfortunate gap.
My wife umnichka, and of course found a way out. Now I tell how it maximum quality has washed all covers in our house.
And she did it as follows:
1. Took the glass cover with metal edging, overturned it and poured into it a conventional hydrogen peroxide. Then, holding the cover in hand, make a circular motion, so that the peroxide has covered the entire inside of the lid, as well as hit the unfortunate slot;
2. Left in this state for 15 minutes cover Th;
3. Then again took cover in his hand made a circular motion;
4. In the next stage in the course went baking soda. She fell asleep in her salt shaker and as evenly spread ground its entire inner surface of the cover. Pour so that the soda has completely closed the gap between the metal and glass edging.
5. Slightly sprinkled on top soda hydrogen peroxide. The reaction started. I wait 5 minutes, and a thin blade with a cloth held by the slit. All the dirt that was in the gap, was on the rag.
6. Well, after a trick, the most remote place cleaned up, left domyt cover inside and outside have normal detergent for dishes.
Thus, the wife washed all 7 covers now they have neat and as good as new! Thanks to his wife!