Handling wooden floors
To protect the wooden floors in the bath following the coating used on premature failure:
· Paint: product composition includes a preservative that prevents the rotting of wood components. The varnish is applied everywhere except in the steam room;
· Impregnation: impregnation protects the wooden floor due fitoitsidov. Means intended for the processing lag and boards;
· Antiseptic: Effect on the board due to fungicides. It has high efficiency, but differs toxicity. Top antiseptic coated lacquer or paint layer.
Means for treatment of wooden floors combine several important features:
· Moisture protection;
· Creating an antibacterial barrier;
· Fire prevention;
· Darkening or whitening.
Refractory compositions used for the treatment of wooden boards, which are located in the stove installation. They do not give 100% guarantee prevention of fires, but slow down the combustion process.
Processing concrete floors
Concrete is known for its durability, but also requires careful care of it. To constant humidity and high temperatures are not destroyed material used products with the following properties:
· Hardening. Compositions of the upper layer is impregnated with concrete - fill all pores and cracks. As a result, the material becomes monolithic and strong;
· Prevention of dust. Over time, the concrete appears concrete dust which prevents a special product, forming a protective layer;
· Protection against moisture. Water-repellent agents are available as impregnation, which protect the concrete from absorbing moisture and from the effects of detergents.
In its composition, the means for treatment of concrete are divided into two groups:
· Organic: are epoxy, acrylic and polyurethane. Have a universal action and operate all three said functions;
· Inorganic: converted to soluble components into insoluble material. As a result, the concrete can not be exposed to moisture and is not washed away.
Tips for handling sex
For high-quality floor treatment is not only important to choose a quality part, but also apply it correctly. There are a few rules to adhere to recommended surface treatment in the bath:
· prior to treatment with the composition of the floor, align the surface. On the floor, there should be no rough edges or protruding fibers. Alignment is performed using a grinding machine;
· Pick up for the processing tool based on the conditions. For large areas of suitable roller in the processing of narrow and inaccessible places it is advisable to use a paint brush;
· Take breaks while processing multiple products floor. If you plan to apply several layers of impregnation, it is necessary to wait for the complete drying of the previous layer. Drying rate is dependent on the type of composition;
· Check the effect of the product on the floor before starting.
The chemical reaction can lead to changes in the external qualities of wood or concrete. To avoid such consequences, try out the material on a small area.