Nowadays screwdriver it is the most common and versatile tool. If necessary, they can tighten the screws and screws, drill. Percussion screwdrivers can drill small holes in the concrete wall or ceiling.
But in this article I want to tell you about one more convenient it features a fast and sufficient high-quality sharpening knives using a power screwdriver. This is certainly not a complete way of sharpening. a little trick and tips for the home.
For work, we need the screwdriver itself, a small strip of sandpaper and double-sided tape is wider. Grit nazhdachki better to choose an average in the range 80 - 120. Cut the width of the strips 3 - 4 cm and a length equal to the diameter of the cartridge.
Before working do not forget about safety, without it, as always, do not! )) Dress gloves and safety goggles.
Let's get started!
As I wrote above, cut out of sandpaper strip width of 3 - 4 cm and a length which is equal to the diameter of the cartridge of your screwdriver.
Next, glue and swathes of double-sided tape around the cartridge. The width of the adhesive tape should be approximately equal to the width of the strip of sandpaper. On top of the tape glue abrasive strip. Well the device and ready. Getting knife sharpening.
Turn screwdriver and drive the knife blade to the desired angle on the sandpaper. We continue to full sharpening a knife.
Keep one hand screwdriver and the other to sharpen not very convenient. So it is best to clamp in the grip of a screwdriver, if available, or hold him to the table clamp. And of course you can be trusted to keep the screwdriver to his wife, as long as you sharpen. It will be a long proud to be involved in such an important and necessary matter. )) 😁