For any of the Russian bath is the most important room massage. Many are not limited only in the sauna steam room, so still parked and pomyvochnaya, dressing room, a relaxation room, locker room and other additional facilities.
Naturally, the most important - is to observe comfortable. And comfort is possible only with proper insulation of buildings. Warm bath for the winter in several ways.
How to insulate the steam room?
There are several ways of warming bath: over bar, as well as from the inside.
Warming outside (basalt wool)
Before cover all the thermally insulating material, it is necessary to put a layer of insulation between the bolster layer and a vapor barrier. Foil vapor barrier will not give wool to absorb moisture, and hence the construction of the wall will not be purged.
Love bathe on weekends and can not imagine my life without the bathhouse? Put Like and subscribe to the channel "bath | From A to Z" !Thanks for the support!
Lay on top of the vapor barrier basalt wool. For KhMAO enough and 100 mm material as the building is not habitable and does not require too massive warming. waterproofing layer is laid over the insulation. Choose tight insulation (60 or 85) which does not fray and does not absorbs moisture from the environment. The material should be non-combustible, you still bath warm up you.
After all the layers need to mount the rack on which to further trim is installed. For example, one considered universal linings. Battens can be painted in any suitable color.
Thermal insulation of the inside
Most users prefer to insulate the building from the inside. Be sure to use non-flammable materials, since the indoor temperature is much higher, and therefore the risk of fire increases.
For example, we use the same basalt wool. The foam used is not worth it, then certainly turns or the stinking all so that the bath you will no longer go down. Try to save the old skin in the steam room and pomyvochnaya, which is made of hardwood lining. This will make the insulation cheaper process.
- Before starting work, remove the old skin in a bath (do it as carefully as possible). All removed sheet folded somewhere in a dry place.
- On the timber or logs, start to sew heater. This example has been chosen all the same basalt wool. It can be installed on the frame structure of timber 5x5. Lay the plate tightly to avoid cracks and gaps.
- On top of a layer of cotton wool staple gun attach a foil vapor barrier, which will help to protect the insulation from condensation and steam coming from the steam room and washing. Furthermore foil helps to keep longer the heat inside the steam room.