Building a bath: Basic mistakes and how to start

  • Dec 24, 2019
click fraud protection

When a decision is made to construct a bath on site, owners often develop rough activity of rapid construction, to warm up as quickly as possible in the new building, and in the end, "shoals", made during construction, make themselves felt in a few years. Very often, this problem arises in self-erecting bath. The reason is that in the heat of the construction fever is not taken into account the previous experience of hundreds of people who built the bath and then have a problem with them.

Where to start and how to continue

The basis of any construction company - the competent accounting and planning. Before you build a bath, think the main stages of construction. Should get approximately the following list:

Step 1. Drafting of the project and budget. At this stage, necessary to define all the main characteristics of future bath. What will be the type of foundation, insulation, which will stand the oven, how much will be rooms - all of these questions need to be clarified in advance.

Step 2. The construction of the bath.

instagram viewer
Start a business with the foundation, walls continue and finish the roof. For each stage, and their material requirements, the violation of which will result in the destruction or premature deterioration.

Step 3. Insulation, decoration and equipment.The final room is in a usable state. Decoration materials must be correctly placed and not interfere with the load-bearing structures.

What should be avoided

The history of the bath building of modern times has accumulated extensive material as a useful notions, improvements and regulations, and frankly wrong and mistaken action. Below averaged list of the most common mistakes that need to be avoided at all stages of construction.

Correctly selected and configured foundation. Whatever may be the light room, it requires a solid foundation. Reliable - not to say the more the better.

The choice of foundation must come from the very structure of the bath and the soil on which it will be.

For example, if the clay, strongly heaving soils arrange melkozaglublennuyu tape and a box made from foam blocks, in time inevitably cracking. In these circumstances, it was necessary to make a slab or pile-rostverkovy option. It happens like this: type is correct, the implementation of pumped up.

  • Wrong choice of wood for the log. As the cheapest and widespread of round timber in the country is pine, ignorant people allowed into his bath. The house is worth. But what is good for the dwelling house, bad for the bath. Result - decay and strong vaporization of resin in the steam room. For a bath is better to choose deciduous species - aspen or lime.
  • Illiterate insulation and waterproofing. With sorrow will reap the consequences of an incorrect host of finishing and stacking of insulation: mold, rot, leaks. And all because of the increased level of humidity is dictating its terms. It is better not to use foam soft materials, mineral wool and closing with aluminum foil. Molded or block-house should be packed with mandatory ventilation gap.

There are many nuances in the construction of the bath, so do not neglect the experience of construction of literate people.

Other channels of the article:

7 inviolable precepts in the bath

Bath for the joints - the benefits and harms?

Helpful information? Do not forget to Like and subscribe "Bath - from A to Z"!