Bench for the bath with his hands: Walkthrough

  • Dec 24, 2019
click fraud protection

After construction of the bath appears incomplete weight "tails" of the example of setting of plinths, mounting of ventilation grids, the assembly of switches and sockets, installation of door handles and furnishing premises.

And the last point is the most important. If no skirting board in the steam room, you can temporarily do, then without the shop to warm up just will not work. How to make benches for steam bathhouse - on.

design Features

Bath bench is different from the usual for its size, which are determined by the intended number of visitors from the height and build, as well as the structure itself in multiple levels. Shops in the bath may be lying and sedentary type, and their size depends on the purpose of the structure.

The following table shows all the features and elements of the exact dimensions of the furniture.

Number of levels is determined by the height of the ceiling. Usually the baths do no more 2-3 levels shops. It will be appreciated especially when the warm air circulation construction planning. Warm air is concentrated on the ceiling, respectively, the last stage will be the hottest.

instagram viewer

Manufacturing steps

The first step is to determine the material. Because of the space, not every kind of wood is fit for the construction of shops in the steam room. You can use lime, larch, aspen, oak, pine or birch. The principal difference, whether finishing baths and furniture made of the same material or different. Also, the preparatory phase is required to make a drawing, and prepare everything.

Walkthrough:

Step 1. By the wall with anchor bolts fastened to the frame supporting the rack. The distance between the elements - 1m.

Step 2. Cut into bars for bath deck chairs. Their length should match the height of tiers.

Step 3. Putting U-shaped design of future lounges of harvested cells.

Step 4. Connect the frame members, corner joints reinforcing bars metal corners.

Step 5. Check frame for strength, if necessary jib set to increase stiffness. Studs skeleton boards.

Step 6. We grind the seats and process them specially impregnated.

Due to the nature excessively humid and very warm room, bath furniture is not painted or varnished.

Other channels of the article:

7 inviolable precepts in the bath

Bath for the joints - the benefits and harms?

Helpful information? Do not forget to Like and subscribe "Bath - from A to Z"!