Construction and repair - a great opportunity to build a comfortable accommodation with a stylish design completely to your liking, or to modify the interior and make it unique. Today, there are a lot of interesting ideas of construction, advanced repair technologies, inventions and genius innovative materials that improve the urban environment and help to express their individuality in the design of houses and apartments.
1. Luminous painting on the walls
At all times people decorated their home so it was not only comfortable, but also aesthetically pleasing living. Producers of finishing materials offer a wide range of products for the decoration of the walls, but sometimes you want some "highlights", and wallpaper or plaster, which they would not have been nice - it's a little boring. But the glowing interior paints offer a broad expanse of imagination. They are based on acrylic and completely safe for health and glowing effect they give phosphor particles.
Fluorescent dyes accumulate in the afternoon light, and give it a night, fluorescent light under the influence of specially installed ultraviolet light sources.
During the day this painting will look like a normal picture, but when darkness begins to glow softly creating a fantastic atmosphere in the room.
2. floor wood mosaic
Wooden floors always look beautiful, original and prestigious. And if this is the end and saw cut, it will look very unusual. For such a floor is selected workpiece spilite approximately equal or different sizes and advance think through laying pattern as to obtain a harmonious composition. The elements are placed on a clean substrate and fill the joints with a special solution. The surface is ground and poured topcoated (epoxy resin).
>>>>Ideas for life | NOVATE.RU<<<<
The technology looks simple only in words, but in reality there are many nuances, from which the durability of the floor will depend. Wood must be able to withstand the loads it is necessary to properly handle and properly put, to get a smooth and durable finish. But all the effort pays off handsomely extraordinary beauty and originality of the floor pattern.
3. Finish "liquid stone"
finishing materials market is more diverse than it seems at first glance. Not so long ago there was an interesting view of decorative plaster - "liquid stone". The material is a mixture of small natural stone fractions and a polymeric binder. It is environmentally friendly and can be used for outer facades and finishes for interiors. Plaster is applied on all surfaces and can be polished as the natural material. "Liquid Stone" has several varieties, imitating finish travertine, granite and even marble, and fits well with a variety of design concepts.
4. Original masonry bricks of fence
Any area in need of fences made of bricks is one of the most popular options. This is a strong and durable building looks nice and respectable. Traditionally a brick is laid out horizontally, but you can add the original appearance of the fence mind laying of "herringbone".
Must see: Cardboard house, which is not afraid of the cold and rain, and going for 1 day
This design does not require any financial costs, but care and painstaking. Before laying the prepared surface with aligned columns restrictive. Brick is placed under an inclination of 45 degrees, and in the process the guide line is continuously monitored, and the angle of installation.
5. decoration fence
To get a beautiful fence is not necessary to use expensive materials, the main thing to be smart. It can be done by hand with concrete and then decorate, for example, causing a pattern imitating brickwork. Kneaded solution of cement and sand is distributed over the surface of the fence and are aligned.
The mixture dries immediately and no material remains soft, which makes it possible to put the picture. With wooden beams on the surface at the same distance otcherchivayut straight line. Along these lines carefully scrape the plaster, giving the bulk pattern. The work requires perseverance, but the results are worth it - get a nice inexpensive fence with the original pattern.
6. Garden decor of concrete
The real highlight of the estate area will be ornaments made by hand. Very popular sheet production of concrete and where to apply them - will prompt a fantasy. For example, one can lay out a track on the site, and make it very simple. Polyethylene spread on a large sheet of the plants, e.g. burdock or rhubarb.
Must see: 17 "masterpieces" from the mountain-masters, who were not able to cope with simple tasks
Prepare a solution of concrete and half of the mixture is applied to the sheet by spreading evenly flat layer. Spread metal grid to enhance the bearing capacity, as major elements, and are intended to track, and then applied to a second portion of the mixture. After 2-3 days when the solution completely freezes, the plant leaf is removed carefully prepared and its sturdy impression.
7. Repair cracks in concrete
With concrete coating occur such troubles as the cracking. Usually they are buried concrete structure or putty, but there is another way to get a perfectly flat floor. The procedure is simple and accessible even to the novice master.
>>>>Ideas for life | NOVATE.RU<<<<
The idea is to use an epoxy resin. In the first stage the fracture is cleaned of dust and debris from the brush means. Then a solution of cracks top sealed, skirting mounted equidistant syringe (without a needle), or any suitable diameter tube.
Upon completion of the syringe is filled through an epoxy resin. It penetrates deep into the crack, filling completely all the recesses and after curing form a strong bond. Further syringes removed, triturated with a solution of the place where they were polished surface to obtain perfectly smooth floor firmly embedded crack.
Practical advice from the Novate.ruEpoxy resin in the solid state does not emit harmful substances, so do not be afraid to use it at home. In the crystallization time volatiles and leave completely harmless material for health.
bonus: How to return the original sills white, without fear of damage
White sill uniquely beautiful, while the new, but it quickly gets dirty and yellow.
We talk about a few ways to work, how to restore the original whiteness of the windowsill, without fear of damage
A source:novate.ru