Wireless transfer via Wi-Fi data has become one of the most important achievements in the field of information technology. Anyway, when it comes to the security of the masses of people. Unfortunately, Wi-Fi wireless networks, there are two minuses. First - a low data rate. Second - it is unstable and weak. The solution is to "put down" other beer-IT people or try to do everything on their own, pre-acquainted with the basics of the matter.
1. In step with the times
First and foremost, you need to do on a happy way to fast and stable Wi-Fi in its home (or at work), make sure the room is set modern router (Router). Today technology is evolving especially quickly. If the equipment is installed and more than 5 years ago, but today it is already a deeply outdated and needs to be replaced.
Conclusion: Update the equipment in a timely manner.
2. Walls and partitions
It is important to choose the place properly. pcworld.com.
In this "difficult" to believe, but in most cases the transfer of the signal in the first place prevent the wall and other walls in the room. The situation can greatly complicated in the event that the premises have any screening system using a metal. Aquarium, mirror and even a metal statuette could become a serious obstacle to the transfer of Wi-Fi signal.
Conclusion: To find the optimum point for indoor equipment.
>>>>Ideas for life | NOVATE.RU<<<<
3. Link
Certainly you had to pay attention to the fact that in addition to your signal in the room there are also others. This is a sign that your router uses the same channel for transmitting a signal that the device and its neighbors. This is not good. According to Russian standards used 13 channels of communication in the country for the Wi-Fi. If one channel is too many signals, the transmission rate will fall. This is a good occasion to specify in the settings of the router other "track", which will be used by the device by default.
Conclusion: Find the free channel to transmit the signal and switch your router to it.
4. fashionable antenna
The people have a huge amount of fans to make the router a makeshift antenna or strengthen already existing by means of wire, foil, sheet metal. In fact, much better to just go and buy modern, more powerful antenna. The standard equipment of this type has a gain of 2 dBi. Introduced in the market range will allow easily find the antenna with gain of 10-20 dBi. Needless to say that this antenna also will look better than something absurd with "tin foil hat"?
Conclusion: The more powerful antenna - the better.
See also: 10 foreign inventions that it's time to use our
5. One is good, three is better
Without antenna router to work will not be exact. However, some modern transmitters are completed with just a pair of antennas! Needless to say that such an approach can significantly improve the quality and data rate of Wi-Fi? Some equipment also allows you to set three or even more than three antennas. This decision seems to be good. As such it is for the most part, and is, that's only if you have to change the antenna, the replacement of two or more, for obvious reasons - it's much larger budgets. An alternative to increase of the number of antennas on the router is to install an additional point in the room (preferably dots) distribution signal. The benefit is "repeater" (repeater) is about as cheap router.
Conclusion: Arrange the room additional signaling points.
6. better wire
Sometimes, a router that does not do what antenna do not put, and to achieve the desired speed Internet connection via Wi-Fi is still not obtained. Typically, this happens because of the layout of the apartment, and there's nothing better you can do. If it is really necessary to achieve a high data transfer rate, for example work, including the media, then the best option in this situation will return to the good old wire.
Conclusion: In some cases it would be better zamorochitsya cable
>>>>Ideas for life | NOVATE.RU<<<<
I would like to learn even more interesting? Then it is necessary to read about 10 tricks with which during the repair can save and fingers, and not smeared with paint in progress.
A source: https://novate.ru/blogs/240619/50804/