How to make yourself a tank for watering flower beds per 1 cu without the high cost

  • Dec 24, 2019
click fraud protection
How to make a pot.
How to make a pot.

Every cottager does not want the summer heat has ruined all the cultural and ornamental plants in his farm. To speed up and simplify watering, it is recommended to build a water tank. This can be done very quickly and without attracting serious money if you know how.

Putting pallets. / Photo: youtube.com.
Putting pallets. / Photo: youtube.com.

In order to create a simple, but incredibly effective capacity for irrigation for mere pennies, it will take nothing at all. Before starting the work it is necessary to get 5 wooden pallets, stretch film, as well as nails or screws. Needless to need some tools, such as a hammer or screwdriver. This, in fact, that's all. When everything is ready, you can start making the tank.

>>>>Ideas for life | NOVATE.RU<<<<

Note: If you can not find a tray, you can easily improvise and use to build the capacity of the board and the usual bars.
We are putting the screws and turn over. / Photo: youtube.com.
We are putting the screws and turn over. / Photo: youtube.com.

So, one pallet is placed on the ground face down. Then to its wide sides need to attach two additional pallet which were deployed along. In order to avoid the further occurrence of slits on the corners, it is recommended to arrange trays breadth. All parties to the wooden structure must leave the front part of the outside. Is connected with nails design (preferably screws).

instagram viewer

See also: Simple cleaver, which will replace the ax for chopping wood in a holiday farm
Winding the film in layers 5-6. / Photo: youtube.com. Advertising
Winding the film in layers 5-6. / Photo: youtube.com. Advertising

The frame is ready. Now turn over the workpiece under the tank bottom upward arming stockpiled film and tying it to any board, make several turns around the future reservoir. Remember that the adhesive side of the film should be compulsorily directed to the frame. During the wrapping film to be stretched as much as possible to form the largest number of layers.

Note: Stretch film is very good stretches. It can be increased up to 200%!
Turn over and fill with water. / Photo: youtube.com.
Turn over and fill with water. / Photo: youtube.com.

When the tank is wrapped with a film on the sides, it is necessary to do the same with the bottom. You can simply put the film directly on the bottom so that the folds were on the side of the frame. When this is done, will only compress the film. After this will only wrap the rest of the side. All should be enough for a roll in the 150-meter-long (should still remain). Buck is ready! We put it on a flat surface and use for its intended purpose.

>>>>Ideas for life | NOVATE.RU<<<<

Video

Continuing the theme, read about 17 most useful for crafts cottages and gardens, which will make every and not only.
A source:
https://novate.ru/blogs/160619/50721/