Greetings to all subscribers and visitors to the channel. Today, once again useful article for all those who have decided to develop their own manual arc welding.
Shaped tube is the most running and popular material for welding in our domestic environment. Beginners, and not only can cut shaped tube grinder is not entirely flat, and then, if there is a need in the dock of the pipe, it turns out the gap sizes. So let's find out the easiest and most affordable way to make a gap in proftrube
Everything in this case is quite simple, you need to fill out the first thing that a gap of appropriate size metal, well, it's just in case you have on hand a large selection of bars, logs, and other metal of things.
But not everyone and not always have a choice, but always we have the electrodes and a hammer, so we will come out of it. Sacrifice one electrode-purify it from the wash.
Take peeled and try on the electrode in the gap-pretends how many cores you need to fill this space. Then grab a hammer and turn the rod and tamp hammer for tighter folding.
Now our bundle of electrodes inserted into the gap, but we do so that issues of clearance on the sides were evenly-they need to fill other gaps on the sides proftruby.
Also do more tack to prozhgom if the rod, he will not fell into the gap and all our actions were not meaningless.
After going through the first tack weld at two locations proftruby edges, welding the edges and collapsed rod electrode. Then the third seam fused these first two seam weld wide crescent.
Now inciting side release hammer, the maximum filling backlash. And as the whole thing brew.
That's all to fill the gap of the electrode rod. it is the easiest and most affordable way to solve this problem.