As is easily and accurately cut sheet metal grinder

  • Dec 25, 2019
click fraud protection

All welcome. Bulgarian nowadays has become one of the most popular tools. Few people from the fans something tinkering with his own hands is not at least a little under 115 grinder disc. Today I want to tell you about the process of cutting sheet metal grinder, which I use myself for a long time. This method becomes quite easily and accurately cut out of sheet metal.

This method is quite simple and reliable. I used to mark up the line of the future cut-coated lace, but no matter how carefully did not try, cut it still turns not perfect - after all we are human beings, not robots. Then I realized that it turned out well and smoothly, you need to keep track of the cut. Began to use for this profile tube or a corner, it became easier and more convenient. But the best view of the guide (in my opinion) is the same as sheet metal, namely, any of its flat side of the factory.

That's how I cut sheet metal. I labeled using roulette desired size and put the guide side plate on these labels by holding clamps to the backsheet. And so the cut will be pretty easy - no need to spare the stress and constant monitoring of the disk grinder, he is on the right path.

instagram viewer

Today had to cut a lot - not only across the sheet, but also along using the same technology.

Then we clean sharp burrs small grinder with the grinding wheel 125.

A rather high-quality cut that never happens, unless you use a guide for the disc grinder.

The photo shows that combining the segment on the sheet and shaped pipes, no uneven torn edges, so I recommend this method, who did not yet know.

Almost forgot - grinders used a large disc 230 of 2 mm thick. You also need to enclose a block of wood cut sheets or proftrubu the entire length of a little away from the cutting, the blade is not clamped. It is not necessary to use a narrow guide sheet metal - can be crooked or a little play (warp) of the disc grinder pressure, it is better not menne 30 cm wide.

I hope the article was helpful! If you have decided to independently develop manual arc welding, then simply click on the text to go to the main channel page, where you can just sign up and choose the most interesting articles!