Hello guys. Today I want to tell about your experience in the ferrous metal cutter, and whether or not to settle. I must say that it was a long time ago, more than 10 years ago, but this is true even today, in the work on the ferrous metal which has changed little. I got a job and worked until the spring of autumn - there is a seasonal work, a lot of work during the warm season and in the winter of work and wages are very low. We took because they were brown welder, although at the time of welding experience was not that great. Issued instrument - long cutter about a meter no less in size and dark welding goggles.
Each cutter in ferrous metal works on the platform where the crane with a huge magnet delivers overall pieces ferrous metal, which you have to cut it into smaller pieces, and then tap removes that you cut up and feeds back Krupnyakov .
I started working, cutting ferrous metal. Complicated about it there is nothing, there is no special qualification is needed, the main thing to adjust the cutting speed normally does. Shorter quickly he adapted and began to properly perform their job. What are the pros and cons of the ferrous metal Gas cutter? I'll start with the minuses - roasting, not only that work in the sun, in addition to tight clothing, plus a lot of heat from the flame of the torch, still well that it is long. The next minus a constant smoke, especially when the wind is not a lot of smoke, which is not weak strain.
Well, now move on to the pluses. But the advantages of the ferrous metal in a very, very much. The season salary is quite decent, twice, three more than the average in your town or village. And still in good perk CHERMET it exists in the form of collection and the subsequent delivery of nonferrous metal. I was pleasantly surprised by this opportunity to see you on the ground valve gives a lot of different piece of iron, among which there are things that either consist of non-ferrous metal, or where there is non-ferrous metal. And all this you between business process and compile. And at the end of the day you are amassed on a few kilos of copper, aluminum, bronze, stainless steel.
And all this giving up successfully and you get a lot of money, that is, in the ferrous metal each day at the end of the work you have cash. The exact amount had not counted, but the feelings of the month it was another salary. But I was young and carefree and that money is often disposed of improperly.
Another huge plus is that you can choose in the ferrous metal a lot of useful things and buy it for pennies. What are these things? Yes a lot of any tools - hammers, crowbars, axes, and pipes, corners, metal of different thickness, and a bunch of all necessary for the construction works for the house, garage and plot. That is, for a season, if not to be lazy and understand what's what, you can stock up a large amount of metal needed for further welding of steel structures. Of course, these tubes. corners and metal will need to be cleaned, join, trim, but all it will cost you very cheap. Summarizing all the above, what I say about the work in the ferrous metal, whether or not to work there? If you are a working man and the physical work on the shoulder, then it is a good job. Of course it is seasonally less, but we have so many works. Ferrous metal in short left me a pretty good memory.
Finally I want to suggest to look cool video where a person shows different useful for his findings in the ferrous metal. Video YouTube channel is constructed from the debris.