Appointment elektrokultivatora somewhat different than that of cultivators, used as part of the walking tractor. Compared with a gasoline engine for cultivators, they have a reduced torque, lighter, their reduced diameter milling cutters. Each type has its own set of work performed.
Application elektrokultivatorov
Rotary cutters do not have sufficient capacity to till the soil, covered with turf. But he quickly loosened previously dug up the ground for the further formation of the beds or planting furrows. Processing row spacing using elektrokultivatora save time and energy. They are easy to maneuver in small flowerbeds.
Absence of exhaust gas - electric cultivator advantage when working in the greenhouse, the greenhouse.
Low weight and dimensions make it easy to transport and storage. It can be transported in the trunk of a car, store room, generally with people, as it does not emit fuel odors.
Functional features models
Manufacturers offer a variety of models.
Therefore, choosing elektrokultivator, you must know its parameters:
- motor power of 0.6 to 2.5 kW. Acquiring device with a more powerful motor must be considered that the power required for its extension section with copper conductors not less than 2.5 sq mm.;
- Less powerful engine develops sufficient torque due to the high gear ratio and reduced operating speed cutters. To supply the engine with elektrokultivatora to 1 kW sufficiently flexible extension with a copper wire of 1.5 mm square cross-section .;
- culturing width of 20 to 55 cm. inter-row treatment requires a narrow set of cutters, and for cultivating large areas preferred cultivator with a wide seizure;
- the depth of penetration into the soil of 15 cm, the average value of - 20 cm. Immersion takes place under its own weight, the unit cuts into the soil by the rotating blades. It takes considerable effort to keep the cultivator.
To handle remote locations without electricity network 220, manufactured pattern with a DC motor and powered by a rechargeable battery. Lithium-ion battery allows to perform work on the site to 45 min.
terms of Use
The long-term satisfactory operation require the owner that the minimum rules:
- You need to periodically monitor the presence of the lubricant in the gearbox. Use lubricants specified in the operating instructions of the unit;
- Avoid overheating of the electric motor;
- for power supply to use an extension cord with adequate cross section wires. Heating extension during operation reduces its conductivity, lowering the motor voltage;
- You can not apply additional load for a better penetration into the ground cutters.
Working with elektrokultivatorom and maintenance do not require special skills and knowledge.