When making the apartment without the designer most admit mistakes is the selection of lighting. That's because it does not believe the most important part of the interior. And in vain! We tell you how to avoid obvious mistakes - do not turn the room into a tangle of wires and not to spoil the interior of a lamp failure.
1. Blister repair without the development plan
At the stage of rough repair electrical wiring system will develop in the apartment, which is then "zashyut" in the plaster walls. Not the fact that the sockets, switches and contacts for lamps and ceiling lights will be there, where it really is necessary, when you decide on the arrangement of furniture.
Council: First, decide where it will be a TV and a dresser with a lamp on it, a sofa with a floor lamp, dining table and a bar with hangers on them, and then devises a scheme wiring. Otherwise you'll have after the repair pull the wire extension cords across the room.
2. Wrong type of chandeliers mounting
A good electrician immediately ask, how do you plan to mount the chandelier from the ceiling. Bad just old-fashioned will fix the ceiling hook. Because of this, after selecting the chandelier you either have to redo fastening system, or accept the fact that the junction with the ceiling is not perfectly accurate.
Council: Most modern fixtures are mounted using a mounting plate, and the classic olive and some the loft - are hung on a hook. Therefore, at the initial stage it is sufficient to determine even with the interior style.
3. The absence of the scattered light
Chandelier on the center of the ceiling had time to fill on edge, so it has become fashionable to give up a ceiling light. This solution is acceptable, for example, in the bedroom, dressing room or even in the kitchen. But living without a soft diffused light is indispensable.
Council: If the chandelier is categorically do not like, you can pick up a few hangers or embed downlights, spotlights and track lighting system.
4. Refusal of the worker, and decorative accent light
In any environment need to think several lighting scenarios. Decide what will be doing in the room the whole family - this will help provide additional working lights. A decorative accent and light is able to change the perception of space - even make the ceiling higher and more spacious bathroom.
Council: By means of bi-directional lamps can visually raise the ceiling. Highlighting one accent wall "postpone" it and expand the room. On the extension of work and LED ribbon, mounted directly on the wall or laid on a ceiling or on the floor instead of the floor.
5. Improper temperature of the light
Warm tone lighting seem more comfortable, but they may distort the color of the interior. Therefore, for the interior in gray-blue tones should choose bulbs cold or natural light. Also, do not mix devices with different shades of light in one interior.
Council: Pay attention to the color temperature, which is indicated on the packaging. 2700K - this is the usual warm light, which creates soft lighting. About 4000K - light, close to natural light, and a marked 5000K cold light bulbs, which are more suitable for offices and industrial buildings.
subscribe to the channeland learn the latest trends in interior design. If you want to see more of this in your stream - Like place.
Author: Paul Shelyagin.
Facebook, Instagram, In contact with, Houzz, Google+