Greetings to you, the readers of my channel!
Last year summer made for the garden 2 interesting flower pot, flowerpot from large plastic bottles. In my opinion, it obtained interesting results that I want to share with you. Of course, not only by the result, but also step by step master class, which I did.
I always like to make crafts out of plastic bottles with them quite easy to operate. A plastic bottle - it is also free material, which is filled up our planet, unfortunately.
For the manufacture of pots, vases, I used:
· Large plastic bottle for 5 and 10 liters;
· Scissors, knife, marker and sandpaper;
· Hot glue;
· The liquid nail polish remover or solvent;
· Screwdriver;
· Screws;
· Spray paint in the can;
· Acrylic paints;
· Universal paint spray.
I will not bore you, let's start!
Step 1.
At the 5-liter bottle cut off the top and bottom. With 10 liter did the same.
That's how I did it.
Step 2.
Sandpaper (nulevkoy) Clean the cut edges and completely sanded bottle.
Step 3.
On the necks of bottles clocked cover. Temporarily pasted bottom to the top on the hot glue.
Step 4.
When the glue has cooled down, tightened screws parts. To this end, it is not necessary to have a screwdriver, screwdriver excels.
Step 5.
Unscrew the cap and tore pots in parts. Soldering iron melted the holes for water drainage.
Does not necessarily have a soldering iron, you can heat the nail over a candle and melted the hole. Just keep the nail with pliers, or burn.
Step 6.
Rubbed all nail polish remover.
Step 7.
He painted all black quick-drying paint from a container and left for 20 minutes.
Step 8.
When dry, it assembles the pieces of vases. Large bronze colored enamel, the method of dry brush and a little silver.
The method of dry brush - When use is almost dry brush, blotting it on paper. This is for those who do not know.
Step 9.
With spray coated pots universal varnish. This varnish is suitable for all: plastic, wood, plaster, etc.
All pots, pots ready, you can plant flowers.
See which flower pots we have done:
Flower pot-planter from a plastic bucket
5 ideas on how to make a mini pots
Flowerpot as a brand
MC Share this with your friends and sign up my channel