Friends, hello!
Some of the articles made of plastic bottles, like many readers, and I decided to share with you another. This simple idea of plastic bottles for the bathroom, which can be implemented in a couple of hours.
In general, plastic bottles - a cast-free material for various craft projects, from which you can make a bunch of interesting things.
I used for the realization of crafts:
· Plastic bottles of 1.5 - 2 liters;
· Wide neck of a plastic bottle;
· Hacksaw;
· Sandpaper;
· Nail polish remover;
· Hot glue;
· Scissors, marker, stationery knife, ruler;
· Spray paint in the can;
· Openwork braid.
Well, now let's make this stand for toothbrushes and toothpaste.
Step 1.
1.5 liter bottle of Coke cut off the top and bottom. The central part can be thrown out, we do not need.
From the bottom of the bottle he measured 7 cm and drew a line. I cut the line.
The upper part tightly fits over the bottom, with an overlap of about 1.5 cm.
Step 2.
The inner surface of the top of bottles are hot glue and put on the bottom.
The glue should be applied on a bit, otherwise the plastic can warp.
Step 3.
From a large 5 liter (or other bottles with a wide neck) saw off hacksaw neck. Do not attempt to cut with a knife, there is plastic is very thick, do not get anything.
In the same way also saw off the necks of two bottles of Coke.
As a result, you should get two narrow and one wide neck.
Step 4.
After sawing necks to have a lot of burrs to be removed. For this I used sandpaper "unity".
Step 5.
In turn, he applied a necks to the plastic blank and outlines the marker.
Step 6.
Cut a hole office knife.
Cut to be very careful, as the plastic thickness at this location is not uniform, the knife can easily slip and cut your hand.
Step 7.
Pasted necks in holes using hot glue. Glue is applied to the rim on the neck - it was very convenient. As if these rims specifically for this already.
Step 8.
Rubbed crafts nail polish remover. This is in order to degrease and to paint a good lay.
Step 9.
He painted from a container. Choose any color what you like.
Step 10.
Glued corrugated ribbon with hot glue.
Hack is ready, you can put it toothbrushes and toothpaste.
Honestly, I thought that the stand will not be stable and will fall. But I was wrong! Objects in it are at an angle and the center of gravity to the bottom, because of this stand was very stable.
It can be easily washed inside using a small brush china.
Look, what we have crafts made their plastic bottles:
Hanging pots from a plastic bottle
Jars for coins in 5 minutes from plastic bottles
The idea of plastic bottles for the kitchen
Please share this crafts in social networks., And subscribe to my RSS feed Sergeyevich master.