Everyone, Hello, friends!
Gorgeous vase made of cardboard, plaster bandage, putty and a few public materials. The result was a large floor vase height 55 cm. Vase with his hands perfectly decorate the corner of any room.
For the manufacture of vases used the following materials:
· Template for printing, you can download it here: http://bit.ly/2n4uAxB
· Cardboard, corrugated cardboard;
· The knife, ruler, pencil, brush;
· Plaster bandage (available at pharmacies);
· Construction coat "finish" on the basis of plaster;
· Sandpaper (nulevka);
· Deep penetrating primer;
· Paper towels;
· Hot glue;
· Carpenter PVA glue;
· The adhesive polymer;
· Any starch;
· Any vegetable oil;
· Acrylic water-based (black and bronze);
· Acrylic water-based lacquer.
From this master class you will learn how to make a vase. MK detailed and step by step, and in the end there will be more videos, when suddenly you will have something that is not clear.
Print out the template in the office paper and cut parts.
Transfer the pattern on heavier paper, on cardboard. This is to ensure that would be a vase was not very liquid. 6 pieces outlines every detail.
Cover the cardboard templates on a wide tape. This must be done, that would further the paper is soaked and the vase is not jarred. Cut out all the details.
It received a total of 18 parts.
Paper glue tape 3 parts to each other from both sides. The result is a 6 blanks for vases.
Merge all parts vases together in the same paper tape. The result is a vase made of cardboard. Neck inside can be, but not necessarily, glue with hot glue.
We put a vase on corrugated cardboard, pressed down and outline the contour of the bottom. Cut out and glue to the bottom of the vase with tape.
Cut the plaster bandages into small pieces and paste them all the vase.
2 hours later, when the layer of the bandage seize, paste the second layer. Just glue bandage on the inside of the neck. Paste the bandage and at the bottom. Leave to dry for 24 hours.
The container, pour a little PVA glue and add water, diluted with filler of medium density. We cover the entire bowl layer of putty.
After 24 hours, when the plaster has dried, it can be sanded with sandpaper. After that, we cover the primer.
Next, we will decorate the vase crumpled paper towels. PVA was diluted with water to approximately 50 to 50, glue is applied to the vase. Paper towels Mnemonic hands and glue. Smoothing brush, applying glue on top of another and wrinkles towel for more.
Now prepare a mixture for the manufacture of decoration. Pour into bowl and pour any starch bit polymeric adhesive. Mesim until a stiff dough. Add a little vegetable oil and mix again.
With the weight we have to work quickly, as it soon begins to dry up, and dries completely in 1-3 days, depending on the thickness of the product.
Molding mass in Molde and paste the resulting decoration on the vase. Sticking to the same PVA glue.
After 24 hours, all paint a vase with black acrylic paint and dry. Next, cover with bronze paint using a dry brush technique.
The paint has dried, now covers the vase with acrylic lacquer.
Decorative vase ready!
If it was not very clear, see also the video:
Friends, please share our vase with friends.
Do not forget to subscribe to a channel Sergeyevich master.