I think many housewives are familiar with the problem when their favorite bathtub gradually turns from snow-white to yellow, becomes covered with a coating and loses its original appearance. The interior of the room as a whole suffers from this.
By the way, it is the state of the bath that can tell a lot about the cleanliness of the hostess. Today I decided to share an effective method that allows you to restore the beauty and shine of the bathroom in a few minutes.
Why does the appearance of the bath deteriorate over time?
After we bathe or take a shower, the walls of the bath are covered with substances that are not soluble in water. Generally speaking, a layer of dirt forms on them. Often tap water has increased hardness, which also negatively affects the condition of plumbing.
Another negative point is corrosion. Many modern apartments have plastic pipes installed today. But in dwellings where repairs have not been carried out for a long time, sometimes there is a steel or cast iron pipeline. Since the water pressure is constantly changing, not only water flows out of the tap, but also plaque.
Bath cleaning methods that you want to forget about forever
Any abrasives are the worst enemy for bathrooms, especially when it comes to acrylic plumbing. This material is a plastic polymer, and therefore mechanical damage can be fatal for it.
Abrasive particles leave small grooves on acrylic products. The inner coating will thin and wear out over the years. As a result, it will disappear altogether.
The same can be said for enameled baths. It is advisable to clean them with products that do not contain solid particles. Of course, enamel is more durable and durable than acrylic. However, over time, it also wears off.
Whichever cleaning product you choose, be sure to wear gloves or your hands can be severely injured. Many products contain acids, and therefore, when working with them, you need to adhere to safety rules.
The method discussed below is a chemical reaction, albeit a very weak one. Therefore, you need to approach cleaning with all seriousness and responsibility, trying to avoid negative consequences.
The method every housewife should adopt
I will now share with you an inexpensive method. The main thing is to strictly follow the instructions below:
1. Take regular baking soda (you need two large spoons). Fill it with a small amount of water and mix thoroughly. The result should be a mixture that resembles porridge in consistency.
2. Arm yourself with a sponge and the prepared emulsion cover the inside of the tub. I advise you to moisten the surface a little before doing this. Wait 5 to 6 minutes.
3. Combine water with citric acid in a separate container. Saturate the sponge with the resulting solution and rinse the soda emulsion from the surface of the bath.
Fast, elementary and efficient! This method will help you get rid of even stubborn dirt. Try it yourself!
Thank you for reading the article to the end! I will be very happy about your like 👍 andsubscribing to the channel.