Often during the construction process one has to deal with the need to concretize small structures. This refers to stairs, garden paths, etc.
Naturally, for such volumes, it is unprofitable to order a whole machine of concrete. Therefore, the solution is kneaded by hand or using a concrete mixer. The second option is not available to everyone, because it is not so often that a common person can see a concrete mixer on the farm.
Therefore, it remains only to stir the concrete with his own hand, spending a lot of effort, energy and time on it.
If you've done this at least once, you probably won't want to repeat it. It turns out that there is a little secret that will help make the process of mixing concrete several times easier. An experienced builder shared this trick with me, and I will tell you about it.
To make the process of mixing concrete with your own hands easier, we do the following:
- 1. Since the consistency of concrete is current, it is most convenient to knead it in an old bath or trough (find another suitable container - great).
When using such containers, all parts of the concrete (and especially crushed stone) will be better enveloped with construction milk. As a result, mixing will be faster and easier.
- 2. In order for the process to proceed with less loss of strength, it is recommended to knead the concrete with a hiller. Usually for these purposes I use a shovel, which is not always good and correct.
The hiller is lighter, with its help the components of the solution will be mixed in a slightly different way.
When using a shovel, a person has to lift concrete, which is not the easiest task.
If you take a hiller, you will notice how much easier it is to mix the concrete. After all, now your movements will be directed towards yourself.
Please use it! Believe me, this little trick will help you save energy when mixing concrete, the process will go much easier and faster.
Thank you for reading the article! If it's not difficult, thank you like 👍 andby subscribing to the channel.