The rake is one of the multifunctional tools used when working in the garden. It can be used for loosening, collecting leaves and debris, revitalizing the lawn and some other operations. Each of the varieties of work performed in the garden requires the use of a special tool. Rakes for different purposes have a cost that varies in a wide range. It is recommended to choose depending on the work for which they are planned to be used.
Please put your likes and subscribe to the channel "About Fasenda". This will allow us to publish more interesting garden articles.
Varieties and types of rakes
For work in the beds, cleaning the lawn, collecting hay, the tool can have a different design. Therefore, you need to know what are the varieties of this garden tool, so as not to be mistaken when purchasing it.
The most common are the following types of rake:
- straight;
- with twisted teeth;
- aerator;
- lawn;
- fan-shaped;
- mini;
- milling.
Each of these varieties has its own design features and is intended for carrying out some work on a personal plot.
The straight rake is a classic model of garden tools. Using this model allows you to do almost any work in the garden. They can loosen and level the soil. With wooden tines, you can easily peel off cut grass and leaves from the area.
The model with twisted teeth is almost the same as the version with straight teeth. In it, the teeth are turned 180 degrees. This variety is used to loosen the earth and break up caked clods. The use of such a tool allows you to speed up the work on preparing the beds for planting.
In rake-aerators, the shape of the teeth resembles a sickle, they are pointed at the bottom. Due to the presence of such a shape, this tool is easy not only to collect garbage, but also to clean moss from the lawn. This tool makes shallow cuts in the soil, up to 3 cm deep, which improves air flow to the roots.
The lawn rake is specially designed for cleaning areas planted with grass. This model is equipped with fine and fine teeth that do not let the grass through. Also, this variety is equipped with a limiter frame, which allows you to move the grass around the site without fear of losing it during transportation.
Fan models are designed for lawn litter and grass thinning. This type of tool is equipped with plate-shaped teeth or wire teeth, which are made of metal or lightweight plastic. The teeth are arranged in the form of a fan, they can be springy or rigid.
Mini rakes have a working width of no more than 20 cm and a short handle. They are designed for hard-to-reach areas of the garden.
The milling rake has two sets of teeth. The side with the sparse tines is used to remove debris from the site, and the side with the sparse crescent tines is used as a soil aerator.
How to choose the right rake?
If we choose the right rake for the lawn, then they must meet some of the requirements that apply to them.
A good and easy-to-use tool should have the following characteristics:
- placed vertically, it must have a handle that reaches the height of the armpits of the person who plans to work with it;
- the width of the working surface should vary from 10 to 70 cm;
- the work bar should be made of steel and have an anti-corrosion coating or plastic when using a tool for cleaning dry vegetation;
- the handle of the tool must be made of wood, aluminum or plastic; to prevent the handle from slipping, rubber inserts must be present on it.
You should not buy a cheap tool, as it has a short service life. If the purchase of different types of tools is required to work on the site, then you should pay attention to kits, in which one shaft is attached to different purpose replacement workers crossbars. Such a kit is cheaper than purchasing different tools separately.
Original articleand many other materials, you can find on ourwebsite.
Please put your likes and subscribe to the channel "About Fasenda". This will allow us to publish more interesting garden articles.
Read more:What saved from phytophthora: make stocks directly from the forest and now