6 reasons why drivers "ruin" the engine in a car

  • Dec 14, 2020
click fraud protection
6 reasons why drivers "ruin" the engine in a car
6 reasons why drivers "ruin" the engine in a car

Recently, you can hear from everywhere that the cars are not the same, the engines have become less reliable and in general - it was better before. There is definitely some truth in this, but the fact is that drivers often perform actions themselves, from which the motors will soon fail. How we "ruin" the engines of our cars - read on.

1. Start in frost

Starting a car in frost is still a pleasure. | Photo: service-gas.vip.
Starting a car in frost is still a pleasure. | Photo: service-gas.vip

For some reason, many people think that modern engines do not require warming up, they say, they started it and you can already go. In fact, in this regard, new motors are no different from those that were made in the middle of the last century. If the oil is cold, it cannot provide lubrication. This means that any engine: new, old, gasoline, diesel - they all require warming up in frost.

Interesting: many experts equate starting an engine in cold weather with driving a thousand kilometers. And there is definitely some truth in this.
instagram viewer

2. Overheat

Overheating will seriously reduce the life of the motor. Photo: i2.wp.com

No less than severe frosts, the engine is afraid of overheating. Poor quality fuel, bad coolant and low coolant levels, leaks in the cooling system - all this leads to overheating of the engine. Also, the so-called "vnatyag" driving leads to overheating - driving at low revs and at high load. Due to severe overheating in the engine, it can: "drive" the cylinder head, cracks appear, break through the cylinder head gasket, destroy the inter-ring baffles in the pistons. It follows from this that the cooling system must be closely monitored, especially on old cars.

3. In the red zone

Lovers of the red zone seriously shorten the life of the engine of their car. | Photo: a.d-cd.net

Each engine has a certain margin of safety, laid down by engineers during development. Those who like to drive keep the engine speed in the zone close to maximum all the time. In this mode, the motor always works at its limit and very quickly consumes its safety margin.

4. Oil

Regular oil changes are essential for reliable engine performance. | Photo: pp.userapi.com

Engine lubrication plays an essential role in its operation. It is very important to regularly change the oil, because over time it loses its properties and is no longer able to provide the required level of surface lubrication. Many drivers neglect the timely oil change and can drive for a long time without changing it. It is even worse when drivers do not regularly check its level and drive with an insufficient amount of it.

READ ALSO:7 signs that eloquently indicate an imminent engine breakdown

5. Water hammer

These are the consequences of a water hammer. | Photo: autoiwc.ru

Quite a rare phenomenon, but it's better to know about its existence. When driving through deep puddles or storming a river on off-road rides, water can get into the engine and then expect trouble. Water is practically not compressed, so the insides of the engine simply break when meeting with it. To prevent this from happening, you always need to monitor the depth of the puddle or river you pass, and move so as not to create a large wave.

>>>>Ideas for life | NOVATE.RU<<<

6. Belt

This motor is waiting for a major overhaul. | Photo: a.d-cd.net

The timing belt is, in fact, a consumable that requires regular replacement. If it is not replaced in time, it may well break off, which will lead to a meeting of valves with pistons and overhaul.

Continuing the topic read: 7 tips on how to drive a car with an “automatic” so that it will serve faithfully for a long time
A source:
https://novate.ru/blogs/121019/52045/