How to remove dents on a car body with a plastic bottle

  • Dec 14, 2020
click fraud protection
How to remove dents on a car body with a plastic bottle
How to remove dents on a car body with a plastic bottle

If a dent appears on the body of your favorite car, then this is not a reason for panic. With the proper skill, the problem can be solved without the help of a master and significant injections of capital. An ordinary plastic bottle from a drink or mineral water will help in eliminating damage. We will apply this method only to not very serious defects, however, for the “old-fashioned” technique, this is not bad either.

Cleaning and degreasing are performed. / Photo: youtube.com.
Cleaning and degreasing are performed. / Photo: youtube.com.

What is needed: 2-3 plastic bottles with lids, a hair dryer (if any), a stick of hot glue.

Before you start straightening the body, you must first prepare the surface. The dent is sanded with medium-grit sandpaper. Then it is degreased several times. After finishing work, the place of straightening will need to be painted in the correct color. Prepare the paint and primer in advance for this.

The cork is glued. / Photo: youtube.com.

Now we take the bottle and on its lid we also sand it with the same piece of sandpaper that was used to process the dent on the body. If desired, you can use a larger sandpaper. After that, the lid is also degreased. When this is done, you can start the real work.

instagram viewer

READ ALSO:Why do some motorists come to mind to insert tennis balls into springs

The bottle is twisted and stretched. / Photo: youtube.com.

Hot glue is heated with a fire, hair dryer or any other suitable means. Immediately after that, apply a generous amount of glue to the cork and quickly glue it in the middle of the dent. If the defect is long, then you need to glue several covers along the entire length. When the corks get stuck, you need to screw the bottles on them. Then everything is simple - we straighten the dent by making constantly increasing growls for the bottles. We do them until the plugs come off. We repeat the described procedure to the bitter end.

>>>>Ideas for life | NOVATE.RU<<<

It remains to paint. / Photo: youtube.com.

When the defect is eliminated, you need to prime and paint the repair site.

Continuing the topic, read about that whether it is necessary to remove the terminals from the battery, if the plans are not to drive for more than a week: the experience of experienced and not only.
A source:
https://novate.ru/blogs/221119/52497/