(!)Subscribe to our channel at Zen >>IDEAS FOR LIFE| NOVATE.RU<
Each owner-cottager sooner or later faces the need to rid the area of the old, useless stump. The most obvious way - grubbing. However, it is difficult. There is another, equally effective, albeit coupled with some risk method. About him now and will be discussed.
To implement this method, you will need a drill, a screwdriver or a hammer drill with a long drill bit for wood. Useful 0.5-meter section of tissue HB, and 100-200 ml of diesel fuel or kerosene. The stump will be removed with the help of the fire, as it was already possible to guess yourself. So what is the sequence?
First, in a stump drill a vertical hole until it stops. Do it as much as will enable the drill. Now drill another hole in the stump, however, it is at an angle.
Prepare it should be so that it is connected to the first hole. When ready, pour into the upper opening our fuel and ignite, making the pre fragment of HB wick tissue and lowering it into the hole. By the way, Novate.ru not recommend the use of gasoline, because it burns quickly.
While stump inflames, it should be done from different sides a few more inclined holes for air. Next, we make every effort to ensure that the stump began to burn steadily. After about 4 hours should be visibly burn the ground. Smoldering tree stump will be a long time. After about 8-10 hours in his position should not be anything left but a small crater.
Continuing the theme crafts home-grown designers that are better to hide and no one to show and not only.
(!)Subscribe to our channel at Zen >>IDEAS FOR LIFE| NOVATE.RU<
A source: https://novate.ru/blogs/141218/48767/