Why the tops of the fence posts are cut at an angle: the experience of old-timers

  • Dec 14, 2020
Why the tops of the fence posts are cut at an angle: the experience of old-timers
Why the tops of the fence posts are cut at an angle: the experience of old-timers

Not every fence in summer cottages has wooden posts. Even fewer fences are "decorated" with the sawn-off top of the post at some angle. Not every owner does this. Obviously, no one is doing curly cutting just like that, and there is some practical sense in such a design. It's time to figure out why this is done and why (in fact) it should be done with every fence.

This is what awaits the pillar if it is not protected. | Photo: chtoikak.ru.
This is what awaits the pillar if it is not protected. | Photo: chtoikak.ru.

The answer to this question is literally on the surface. As you might guess, the tree, under the influence of external factors, has a bad habit of deteriorating, first of all, to dry out and rot. Sunshine, rain and snow - none of the above is in any way useful for a wooden fence. Therefore, competent summer residents take a variety of measures to protect materials from an aggressive environment. Actually, the oblique saw cut of the fence avoids the accumulation of water at the top of the column, which means it protects it from premature decay.

instagram viewer
The fence should be painted. | Photo: yandex.com.

Making an oblique saw cut is the easiest way, but admittedly, it is far from the best. In the old days, they tried to put fences in wooden ones on pillars that were not cut down from above, but chopped off with an ax under a stake. This was done so that the fibers and capillaries of the tree (pillar) would crumple and crumple. In this way, an important structural element received advanced protection against moisture and began to rot even later. Finally, it is much less likely that snow remains on a sharp stake.

READ ALSO:So that it does not dry out and does not germinate: rules for storing garlic in an apartment

Best placed on rails. | Photo: domodelie.ru.

However, if the fence is on wooden posts, it is best not to make any bevel cuts or log cabins for a stake, and then put on top of the pieces of wood some kind of cover, metal, or even better - plastic. For reliability, you can put it on nails or screws. Unlike an oblique saw cut, this method of protection will be almost absolute. It is even better to cover the posts with protective compounds against moisture and insects.

>>>>Ideas for life | NOVATE.RU<<<

However, really experienced owners will say that you need to put a fence for centuries not on wooden posts, but on concrete or metal rails!

Or on concrete pillars. ¦ Photo: zbbr.ru.

If you want to know something else useful,

Fine.

then it is worth paying attention to 5 common mistakes for which a summer resident will have to pay a fine.
Source:
https://novate.ru/blogs/060220/53333/