11 simple tips to cut your electricity bill by half!

  • Dec 14, 2020

Savings are one of the most important items in the energy sector. Any line must correspond to the set goal, be reliable, durable, as safe as possible and most importantly - economical. 11 tips will help you minimize your energy bills and cut your electricity bills by at least 2 times.

1. Purchase a portable electricity meter

There is such a modern electrical metering device for electricity consumption, which you can simply plug into an outlet. Allows you to measure the flow rate at individual consumers, for example, on a washing machine, boiler or hob. You can always see if a certain household appliance consumes too much and may not turn it on again or even replace it.

Figure 1: Portable wattmeter
Figure 1: Portable wattmeter

2. Disconnect all users except the most important

When leaving an apartment or house, even for a short time, only the refrigerator should be left on. Boiler, TV, even a Wi-Fi router should be turned off from the outlet. The minimum consumption in a few hours adds up to large numbers for the year.

3. Fill the refrigerator with food

instagram viewer

Less empty space in the refrigerator means less consumption. Proven by time and by a lot of users who want to save on electricity. Therefore, it is best to clog it with products as much as possible.

Figure 2: More food - less energy consumption

4. Use a portable fan instead of an air conditioner

The consumption of which is minimal, and the productivity is high enough. Even on very hot days, the directional airflow from the fan makes you feel comfortable. When the air conditioner is running, there is also a great chance of catching a cold.

Figure 3: Portable Fan - Convenient and Practical Device

5. Only use the dishwasher as a last resort

"Dishwasher" is a convenient device, but its energy consumption is too high. True, when washing dishes manually, water consumption is much higher, so in this case you have to choose the least of evils.

Figure: 4. Nobody canceled a hand wash!

6. Put the maximum amount of clothes in the "washing machine"

In order to reduce the number of washes. Just do not exceed the norm of loaded clothes, otherwise, with the difficult operation of the engine, the power consumption, on the contrary, increases. This mode of operation also has a detrimental effect on the operating life of the washing machine.

Figure: 5. Saving on washing

7. Switch off convectors and other heaters if possible

Even a temperature of 18 degrees can be acceptable, so it is okay to turn off the convector for several hours. And at night you can always hide with a warmer blanket or even two.

8. Heat water on a gas stove, not in an electric kettle

Electricity consumption by an electric kettle is rarely less than 1 kW. And it takes at least 5-7 minutes to boil water. If you count all the switching on of the device per day, then the figure can be impressive. Therefore, it is best to use a gas oven, if you have one.

9. Install motion sensors

Figure: 6. Motion sensors turn on the light when needed

And set them up for a minimum time period. Many users forget to turn off the light, which leads to waste of energy, especially if incandescent lamps are installed in the lighting sources.

10. Do not leave the iron on

The iron belongs to the category of electrical appliances, in which electricity is converted into heat. Because of this, the consumption of the device is already high, and it is better not to leave it working "idle".

11. Replace incandescent bulbs with LED

LED products are extremely popular due to their low power consumption and good light output. In addition, many manufacturers of such products often provide a solid warranty period of up to two years.