Various devices for inventory storage, and simplification of the working process greatly facilitate the work of the master. When everything is in its place, I do not have to spend valuable time looking for the necessary work in detail.
There are different versions of Organizer, which can be made from scrap materials themselves - used packaging boards residues, etc. This not only helps to save money, but will also be useful for honing artisan skills. A workshop with crafts made by yourself you can arrange completely to your liking, making the most comfortable for themselves.
1. Organizer for small things
Each home has a master stock of fasteners and should take care of their organized storage. The simplest device is quick to make a piece of polypropylene tube (Ø25 mm) stub (Ø110 mm) for the domestic sewage and clips for fastening pipes. In the center of each clip on each side of the plug drill hole. By using small bolts and nuts connect clips with plugs.
Further stub provided with clip, fastened to the tube. To the suspension arrangement on the wall also use clips of polypropylene, but other types - with latches.
The result is a useful organizer with mobile drawers for compact storage of various small things.
2. hanging organizer
Another version of a homemade organizer will require more time, but it is also very convenient for storage. For homemade need three plates, bar and empty jars of baby food, or other similar containers. One plaque will rectangular base. The other two tablets paint shape with a wide bottom and slightly narrowed upper part of the bar of equal width and then cut the edges of the marked lines. This will be the organizer edge.
Bar abate slightly in the ribs, smoothing the contours and carefully zashlifovyvayut. Next, the workpiece is coated with paint. It can be done in one color or highlight bar contrasting shade.
>>>>Ideas for life | NOVATE.RU<<<
Next, at the ends of the bar in the center of the hole and cut zasverlivayut threads for fastening bolts. To drill became perpendicular to the surface as a guide, you can use the mounting bracket.
In the upper part of the side hole zasverlivayut blanks and inserted into the appropriate size of the bearing. On all four sides of the bar at an equal distance from the screwed cap jars of baby food.
Then the structure is collected: the side portions connected to the base by screwing screws, and a bar fastened via bolts and washers.
Ready organizer hang on the wall in a convenient location. Fasteners shall sort of jars and containers bolted to the cover.
Helpful advice from Novate.ru: When painting parts from a container at home or on the balcony, use any cardboard box. Its bumpers protect the surrounding area from spray paint, and your interior will be clean.
3. Lamp for garage
When the repair work is very important a good visibility. If accidentally overlooked the old hose from the shower is unnecessary clamp can make a simple lamp, which is more convenient to use than the store. To begin with corrugated hose is removed and cut a piece of approximately 70-80 cm. Next, you will need two cables: one with a cartridge and the second - a tougher, which is able to bend, but it will keep the shape. For the convenience of their ends are fastened with tape, and both wires are pulled through the metal corrugated.
Further corrugation prisborivayut shifting to the cartridge due to its contracting structure, and fixed in that position securing edge tape. If you have some old and a little shade, you can attach it to the cartridge. If not, then if you want you can do it yourself, for example, cut out from a plastic bottle. It is necessary to remember about fire safety and to check whether such a heated bowl. It definitely need to make holes for better air circulation.
Now you will need a small metal tube length of about 50 cm. It should be hollow inside and a diameter that there passed the corrugation of the soul. To attach the tube clamp tightly primatyvaya tape or electrical tape to mix well kept.
Then the tube is pulled through the workpiece with corrugations and the end of the wire is connected with a fork.
>>>>Ideas for life | NOVATE.RU<<<
This simple lamp easily secured at any desired location by means of the clamp - on a shelf, on the table, and even the ceiling, if there is to be hooked. The tube allows adjustment of the length and inclination by adjusting the position of the most convenient way.
Corrugation of it easily extends and retracts, and the lamp is turned effortlessly in any direction. Due to the rigid cables inside the corrugated pretty well it holds a predetermined shape that allows you to direct the light wherever needed.