Something fed up with forays into nature, eating barbecue. It's time to cook other delicious meat dishes at home. And in this we will be helped by a simple device that can be assembled once and used periodically. We will assemble a press from a plastic bottle to form a beautiful oblong Lula kebab from natural meat.
First we need:
1) Cola bottle 0.5 liters.
2) Aluminum can.
3) Skewers, wooden sticks
4) Corner, plastic, 25 mm in diameter.
We drill a hole in the corner wall, exactly in the center.
There we will insert a wooden skewer. The hole diameter should not be too large. Otherwise the minced meat will go wrong.
Further it is necessary to heat one side of the corner to soften the plastic. To do this, you can use a gas burner, a hair dryer or a soldering iron for tubes.
Having softened the plastic, we wind the bottle, "cut the thread".
The next step is to prepare the minced meat bottle. Issuelwe drink liquid.
Cut off the bottom. We need a straight section without corrugation.
You should get such a machine.
We head to the kitchen and get ready for cooking.
We make minced meat to your taste. But it's important to know. It shouldn't be watery. It should be crumpled longer. And if you add onions, then try to drain the liquid.
We fill the bottle with minced meat.
Having filled to the brim, we place it on the jar. We insert a wooden stick.
And we start to press. A dense sausage with a skewer inside should creep out.
With a little practice, you get the ideal Lula-kebab shape.
Rate a useful homemade product like. It's easy for you to press, and I'm very pleased.