Disassembled the valve of the anti-leakage system. I thought that it works like a valve from a washing machine. But no. Hydrodynamics "decides"

  • Dec 16, 2020
click fraud protection

Disassembled the valve from the inexpensive anti-leakage system. Find out how it works.

Disassembled the valve of the anti-leakage system. I thought that it works like a valve from a washing machine. But no. Hydrodynamics "decides"
Disassembled the valve of the anti-leakage system. I thought that it works like a valve from a washing machine. But no. Hydrodynamics "decides"
  • Brass valves "AquaBlok-Cinderella" stand on my water system. I have unmounted valves, but in a plastic body. And I will disassemble them.

Explanation

Typically, in leakage protection systems, motorized ball valves are used. When moisture gets on their sensors, they overlap. These devices are quite expensive. In my review, there was a system in which valves are used instead of taps. Working autonomously, without external power sources for at least a year. And this system is 2 or even 3 times cheaper than other analogues that depend on sockets.

Before disassembling the energy efficient valve, let's refresh our memory what they are:

  • Solenoid valves are normally closed, normally open and bistable. IN "AquaBlok-Cinderella" applied BISTABLE.
    In a normally open valve, voltage is applied to close it and is held as long as the valve is closed.
    In a normally closed, the opposite is true. Such, for example, are in washing machines.
    instagram viewer

    In the bistable, the power supply is applied for a short time only to switch the valve mode for 0.5 seconds. We will review such a valve.
  • So, we disassemble, unscrew four screws and remove the upper part. Before us is a rod with a silicone gasket.

In order to see how it works, I connected it to the control unit and pressed the open button, the rod flew out and almost knocked out the eye of the author of the text. Naturally, she has no free wheel in the assembled state. And how it works, take a look GIF-ku:

Next, we are interested in the platform against which the stock rests

Under this platform is a "membrane" that blocks and opens the main flow.

The body itself, as you can see, is divided into two parts. Very similar to a conventional valve.

Principle of operation:

  • By blocking or opening a small hole, due to the fluid overflow, we can influence the membrane, which closes or opens the main fluid flow.
  • Very little energy is required to open or close the bistable valve. And in standby mode, the system itself does not consume electricity (less than 20 microamperes is almost nothing. The battery will be discharged for 5-10 years with this current).
  • But if the device is discharged (after a year or two), then it will beep. Which you will surely hear and see.

Information on the operation of this valve and the leak protection system itself "AquaBlok-Cinderella"you can look at the official website of the domestic manufacturer - LLC "Scientific and Production Enterprise" BIOS "

How to install "AquaBlok-Cinderella" article here: link

How to unpack "AquaBlok-Cinderella" article here: link

I hope I was able to convey useful information to you