What needs to be done on the nut slot before winding on the bolt: Masters Experience

  • Dec 24, 2019

Experienced craftsmen know a lot of useful tricks that can help find a way out of even the most difficult situation. One had seen as companion slot does almost every nut. First there were absolutely unclear why all this. When lucky enough to find the appointment slots, would exclaim: "Sam never would have guessed."

Serious problem. | Photo: skidka-voronezh.ru
Serious problem. | Photo: skidka-voronezh.ru

There are many ways to solve the most unexpected domestic problems. Sometimes, it is necessary to use non-standard techniques that are familiar only to the most experienced craftsmen and craftsmen.

>>>>Ideas for life | NOVATE.RU<<<

For example, to make a slot in the nut before it screwed onto the bolt. Immediately raised the question: why do it? It turned out that everything is very simple. The fact that each bolt sooner or later lose his thread for various reasons. Most often, it just grinds.

The tool is not at all. | Photo: skidka-voronezh.ru.
The tool is not at all. | Photo: skidka-voronezh.ru.

In order to restore the thread in the Hardware, you should use a special tool, or simply change the bolt entirely. However, you can try to solve the problem and "popular" way.

For this purpose in the nut and bolt to a specific cross-threading is done through cut. To create a slot ideal Bulgarian or hacksaw.

Note: Definitely a professional tool for restoration of carving to help cope with the task easier and faster, and most importantly - with almost 100% probability of success. However, the described method is suitable for cases of emergency, when such a tool at hand is not.
Make a slot like that. | Photo: vk.com.
Make a slot like that. | Photo: vk.com.

Having made the first cut, you should take another exactly the same on the other hand. As a result of the nuts should have two equal parts. They need to be clamped on the problematic bolts with pipe wrench.

>>>>Ideas for life | NOVATE.RU<<<

We perform an impromptu turning away and see how the old bolt regains its thread. Immediately thereafter, the updated metiz can be used on the farm.

Dress two Circuits and start spinning. | Photo: vk.com.
Dress two Circuits and start spinning. | Photo: vk.com.

I would like to learn more interesting things? Then read on, how to replace a line in the trimmer on the steel cable for cutting thick grass and bushesSignificantly increasing the efficiency of the device.

A source: https://novate.ru/blogs/180819/51420/