Means all motorists are not fully aware of what you need to periodically wash not only the car as a whole, but also its motor. This procedure is associated with some risk, but it remains an important item on the list of car care procedures. If you do not do this from time to time, you can face serious and very unexpected problems.
Why wash motor
The purity of the engine - this is a very important question. Just as important as the cleanliness of the car body. You need to do is to reduce the risk of a variety of failures related to dust and dirt. In addition, the motor will always be freshly laundered better noticeable smudges various working fluids. To carry out the procedure for engine washing should be 1-2 times a year. This can be done both in the home and seek help from a specialist.
How to wash motor
It is best to wash your car in the spring or autumn. The worst option would be to attempt to wash the car engine in winter. To make this possible, but in this case it is necessary to attend to a matter of a quick drying of all the elements of the machine. Otherwise, the mud returns at the very first travel, and special chemicals can have on the internal components of a destructive impact. Advertising
Note: Do not forget that in adverse conditions properly washed the engine may be exposed to corrosion.
Before you take up the cleaning of the engine, it is necessary to choose cleaning products. Fortunately, special shops offer an impressive range of the cleaning chemistry. The best choice - a special road funds. Next, you need to attend to a hardware issue. It is best to wash the engine using a high pressure cleaner (Karcher). Hard to reach places to clean the motor with brushes of different sizes. There must be reserved with a clean cloth for wiping. Finally, a compressor or a vacuum cleaner handy in a pinch, you can use a can of compressed air.
READ ALSO: How to remove a crack on the windshield without costly repairs
Before starting the engine for the washing procedure, the engine must be cool. It is mandatory to disconnect and remove the battery. All nodes do not tolerate communication with water - connectors, generator control unit, the fuse box must be either removed or thoroughly insulated. The washing process is required to plot the detergent on the entire surface of the engine. The foam was washed off several times. When ready to proceed to the motor dry.
>>>>Ideas for life | NOVATE.RU<<<
I would like to learn even more interesting? Then you should read about 7 signs that eloquently indicate that the machine time to change in the foreseeable future.
A source: https://novate.ru/blogs/180819/51421/