Due to the high indicators of reliability, versatility, as well as low cost indicators, the profile flooring was and remains one of the most popular materials in the household for creating all kinds of walls and fences. The rigid construction will serve faithfully for more than one year. However, first, the professional sheet must be correctly fixed, which is no longer as easy to do as it might seem at first glance.
1. We calculate the future fence
Before taking on the work of installing the fence, it is necessary to calculate the exact amount of materials required. It is necessary to take into account the number of posts and the total length of the fence, the material from which the fence posts are made, the potential width of the "overlap" of the sheets when joining, the height of the fence. An analysis of all these factors will make it possible to estimate the amount of corrugated board that needs to be prepared, as well as the characteristics of each individual sheet.
2. The subtleties of attaching the profiled sheet to different pillars
The most important point in creating a fence from a profiled sheet is the material of the fence posts. Such an important thing as the features of the future fastening will depend on it. Wooden posts are the most economical option and the easiest to install. It will be more difficult to work with metal supports, in particular, one should not forget about coating the metal with anti-corrosion compounds (or painting the poles). Brick supports under the fence are the most difficult option, but also the most durable. In any case, the corrugated board will be fixed on the corners fixed on the posts. Metal poles are especially good in this matter, since you can simply use welding to fix the corners.
READ ALSO: The summer resident made a scarecrow from a plastic bottle, which birds fly around the tenth way
3. Choosing fasteners
An important stage of construction is the selection of fasteners. There are three main ways to fix sheets. The first and most obvious is to put the flooring on self-tapping screws (screws, bolts). The main advantage of this method is its obvious simplicity, as well as the fact that the fence can be disassembled on occasion without unnecessary problems.
Important: if hardware is used to fix the corrugated board, then two important subtleties must be remembered. First, the hardware should always be located straight (perpendicular to the post). The second - under the head of a bolt or self-tapping screw, it is necessary to put a rubber lining to protect against corrosion and improve the quality of the connection.
The second option is rivets. Not very popular, requiring a lot of effort and special skills (or at least work experience). However, rivets are inherently the best option when it comes to durability.
The third option is electric welding. It is quite popular, but many owners forget that welding in this particular case is not very reliable. Including due to the fact that the created fasteners sooner or later succumb to rust.
>>>>Ideas for life | NOVATE.RU<<<<
4. Connection methods
There are two main ways to connect the profiled sheet during the installation of the fence - butt and overlap. The overlap method is much more popular due to its simplicity. The amount of overlap should be equal to one bend. When using it, the hardware used to fix the sheets is screwed in until the materials fit snugly.
Important: it must be remembered that when installing the fence, you need to constantly make markings and check it with a level.
Continuing the topic, read about why don't americans build fences in front of houses.
A source: https://novate.ru/blogs/100720/55249/