Flexible water hoses now and then remain in the house in excess after the next replacement or repair of plumbing. Throwing away such wealth would be a real barbarism and a manifestation of extreme irresponsibility! Experienced owners are well aware that flexible eyeliner can be used with benefit on the farm. Sometimes in very unusual ways. Experienced master owners willingly share good advice on this matter with others.
1. Making a stub
Flexible hose can be used to make an excellent plug for a pipe. It is enough to remove the nut on one side, removing the O-ring and unnecessary hose residue. Then you should pick up a coin that is suitable in diameter and put it into the washer so that it covers it completely. An o-ring is placed on top of the coin and another coin is placed on top of it.
2. Manufacturing of the adapter
One nut is cut again. The O-ring and the remainder of the hose are removed from it. A fitting for a hose of a smaller diameter is taken and inserted into a nut and an O-ring. After that, the working nut is screwed onto the desired pipe and clamped properly with a wrench. To prevent the structure from leaking, a new silicone ring should be installed.
3. Making a leash for spinning
Hose wrap is a great material for tying a spinning leash. You need to carefully weave a small strand and put the floating head connectors on it on both sides. Handle the winding with great care, as it easily cuts skin and flesh. The use of protective gloves is recommended.
READ ALSO: A useful feature in the car glove compartment that most drivers don't know about
4. Making a brush head
Hose wrapping can also be used to create a brush, including a brush head for a screwdriver or drill. You can unravel the edge of the braid with an awl. The workpiece is cut to 2-3 centimeters. The material is fixed to the nozzle with a nut. Care should also be taken when working with the braid.
>>>>Ideas for life | NOVATE.RU<<<
5. Making a hand for a tool
And plumbing hoses make good handles for various tools. First of all, we are talking about various files and files. Simply slide the length of the hose onto the base. If necessary, place a pair of heat shrink tubing under the hose. Finally, blow hot air from a hot air gun onto the instrument for a few minutes.
If you want to know even more interesting things, then you should read about proven wayshow to clean and bleach an old bathtub with improvised means.
A source: https://novate.ru/blogs/190720/55367/