Why Soviet TV housings were made of wood, not plastic

  • Mar 04, 2021
click fraud protection
Why Soviet TV housings were made of wood, not plastic
Why Soviet TV housings were made of wood, not plastic

Many will not even remember now, but in the distant Soviet times, televisions looked completely different. Moreover, completely different materials were taken for their manufacture. For example, the body of this technique was completely wooden. Why was wood taken as a basis for many years? The answer is simple enough.

For a long time, TVs with a wooden case have been produced by foreign companies / Photo: sega-16.com
For a long time, TVs with a wooden case have been produced by foreign companies / Photo: sega-16.com

It should be noted right away that similar boxes were produced in other countries, such as the United States of America, European countries, and Japan. By the way, at the beginning of the 2000s, there were also models with wooden bodies, although they could be seen very rarely. Even when plastic was firmly established in people's lives, production continued to work according to standard proven technology with familiar materials. It would seem why this is so, if everything can be simplified.

Production in the Soviet Union was tuned to the production of wooden cases / Photo: diletant.media
instagram viewer

To be honest, it was possible to switch to plastic back in the sixties and seventies of the last century. But as in most cases, the transition dragged on for years. The problem was not so much a lack of material itself as the difficulty of rebuilding production lines. This process took quite a long time - more than one year.

Even after the appearance and use of plastic in the manufacture of televisions, the Soviet industry worked according to the old scheme / Photo: m24.ru

Do not forget about scientific progress, which did not stand aside. In our world, almost any plastic part can be printed using a 3D printer. But in the last century, such technologies have not yet been invented even in Japan, let alone the Soviet Union. Therefore, we moved along the beaten path - they took a tree and erected buildings.

Fear of the sun or why wood was preferred

The wooden case did not allow the TV to get very hot / Photo: naurok.com.ua

Oddly enough, but domestic design engineers were wary of solar radiation in terms of televisions. Even the instructions for these devices contained a warning regarding this issue. It was recommended to place the devices in places where the sun's rays do not reach. In their opinion, the plastic cases were very thin, which would lead to faster and more intense heating of TVs. A tree is quite another matter.

Despite the large thickness of the tree, it was recommended to put TVs away from sunlight / Photo: ruspekh.ru

As a rule, the plywood from which the cases were made was very thick - almost a finger thick. But they believed that problems would not arise if the product was in the shade. It is difficult to say how correct this assumption was today.

>>>>Ideas for life | NOVATE.RU<<<<

The problem of the transition from wood to plastic in the production of TVs was the lack of technical equipment / Photo: rw6ase.narod.ru

A more compelling reason is problems with the conversion of manufacturing plants. Despite the fact that gradually in other countries everyone began to switch to plastic, our manufacturers could not afford it from a technical point of view.

Today, plastic cases are used everywhere, but you should not rush to get rid of the Soviet wooden models familiar to everyone. Read,
what can be done from an old TV that has been gathering dust in the attic or garage for years.
A source:
https://novate.ru/blogs/010820/55520/